Sway bar front upgrade?
#1
Member
Thread Starter
Join Date: Feb 2010
Location: Strongsville, Ohio
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 l
Sway bar front upgrade?
What year do I get the sway bar from grand cherokee? The jy down the road has a 2000 grand with a good sway bar but not sure if it will work on my 92 Cherokee.
My bar is 23 or 24 mm depends where you check it at. It needs new bushings so I thought I would upgrade it. If I measure the bar where it mounts it is 23mm and where the bar is not worn its 24mm. which bushing should I get if I don't upgrade.
Thanks
My bar is 23 or 24 mm depends where you check it at. It needs new bushings so I thought I would upgrade it. If I measure the bar where it mounts it is 23mm and where the bar is not worn its 24mm. which bushing should I get if I don't upgrade.
Thanks
#2
CF Veteran
Join Date: Jul 2008
Location: Schnecksville, PA
Posts: 1,217
Likes: 0
Received 5 Likes
on
5 Posts
Year: 94 XJ
Model: Cherokee
Engine: 4.0L
It's not a direct bolt-in.
The endlinks are completely different.
AND
I believe -the distance from the body mounting point to the endlink is greater than that of the XJ.
Perhaps a trip back to the j/y armed with a tape measure (and camera) will net more concrete results.
The endlinks are completely different.
AND
I believe -the distance from the body mounting point to the endlink is greater than that of the XJ.
Perhaps a trip back to the j/y armed with a tape measure (and camera) will net more concrete results.
#3
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
It's not a direct bolt-in.
The endlinks are completely different.
AND
I believe -the distance from the body mounting point to the endlink is greater than that of the XJ.
Perhaps a trip back to the j/y armed with a tape measure (and camera) will net more concrete results.
The endlinks are completely different.
AND
I believe -the distance from the body mounting point to the endlink is greater than that of the XJ.
Perhaps a trip back to the j/y armed with a tape measure (and camera) will net more concrete results.
Actually it is a direct bolt in from a ZJ. Check out goblazer's great write up
https://www.cherokeeforum.com/f51/v8...o-xj-mj-20347/
#4
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
What year do I get the sway bar from grand cherokee? The jy down the road has a 2000 grand with a good sway bar but not sure if it will work on my 92 Cherokee.
My bar is 23 or 24 mm depends where you check it at. It needs new bushings so I thought I would upgrade it. If I measure the bar where it mounts it is 23mm and where the bar is not worn its 24mm. which bushing should I get if I don't upgrade.
Thanks
My bar is 23 or 24 mm depends where you check it at. It needs new bushings so I thought I would upgrade it. If I measure the bar where it mounts it is 23mm and where the bar is not worn its 24mm. which bushing should I get if I don't upgrade.
Thanks
#7
Member
Thread Starter
Join Date: Feb 2010
Location: Strongsville, Ohio
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0 l
Ok thanks
I had read that write up before. I think thats where I got the ideal from. Junkyard near me has a 2000.
Thanks for the input.
I had read that write up before. I think thats where I got the ideal from. Junkyard near me has a 2000.
Thanks for the input.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
0
08-28-2015 12:28 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)