Street Truck questions?
Thread Starter
Newbie
Joined: Nov 2010
Posts: 12
Likes: 0
From: Toronto
Year: 1988
Model: Cherokee
Engine: 5.7L LT1
You have given me something to think about. Not at the moment but future thing to think about.
Sorry for the delay, here is where I am at with pics at the moment.
I have some very old one's of it when I got it years ago, but ill half to scan them at some point














Sorry for the delay, here is where I am at with pics at the moment.
I have some very old one's of it when I got it years ago, but ill half to scan them at some point














Thread Starter
Newbie
Joined: Nov 2010
Posts: 12
Likes: 0
From: Toronto
Year: 1988
Model: Cherokee
Engine: 5.7L LT1
A bit further ahead then it looks just don't have the updated pics yet.
I have not stripped the doors/fenders off yet since I am waiting for a good 97+ parts truck. Once I have that I will swap all the body panels and paint the door jams ect. I have to many cars torn apart to have even more parts laying around lol
Motor is fully wired along with body harness (I thinned out the fire bird harness so I could retain things like performance shift mode, and other accessories and to keep it clean and updated. All under dash work is done, carpet in, fuel lines/brake lines run, power steering good to go
A bunch more stuff I can't think of right now, kinda waiting on the 97+ parts so I can finish up
I have not stripped the doors/fenders off yet since I am waiting for a good 97+ parts truck. Once I have that I will swap all the body panels and paint the door jams ect. I have to many cars torn apart to have even more parts laying around lol
Motor is fully wired along with body harness (I thinned out the fire bird harness so I could retain things like performance shift mode, and other accessories and to keep it clean and updated. All under dash work is done, carpet in, fuel lines/brake lines run, power steering good to go
A bunch more stuff I can't think of right now, kinda waiting on the 97+ parts so I can finish up
Thread Starter
Newbie
Joined: Nov 2010
Posts: 12
Likes: 0
From: Toronto
Year: 1988
Model: Cherokee
Engine: 5.7L LT1
Hey guys little updape
Finally found my parts trucks. 1999 Jeep Cherokee sport. It has 405,000km one owner for $700. Its over heating and clunks pretty good, but the parts are almost perfect minus some door rust on the one side. I will use it for now to line up my striker and replace it later. Good for the exterior/cosmetic front portion/doors/dash/brakes/misc I wanted.
I also got a 1989 Comanche that rusted badly. Just gonna use is for the odds and ends, like roof liner, back window ect
If you need any parts that Im not using let me know. engine parts/wiring ect. I want to strip them pretty fast so I don't have two heaps in the way! Will sell them cheap, and have a good ebay track and many other clubs
The dash look pretty straight forward and hopefully I can fit in a 95-96 Camaro cluster in it so I can retain all my gauges/body functions My steering column is from the firebird but it should be pretty close.
I am pretty close, just time is the issue. I hope to have alot more in the coming weeks to finish this build. I will post more pics in the next couple days and im sure ill have a few questions for you guys
Finally found my parts trucks. 1999 Jeep Cherokee sport. It has 405,000km one owner for $700. Its over heating and clunks pretty good, but the parts are almost perfect minus some door rust on the one side. I will use it for now to line up my striker and replace it later. Good for the exterior/cosmetic front portion/doors/dash/brakes/misc I wanted.
I also got a 1989 Comanche that rusted badly. Just gonna use is for the odds and ends, like roof liner, back window ect
If you need any parts that Im not using let me know. engine parts/wiring ect. I want to strip them pretty fast so I don't have two heaps in the way! Will sell them cheap, and have a good ebay track and many other clubs
The dash look pretty straight forward and hopefully I can fit in a 95-96 Camaro cluster in it so I can retain all my gauges/body functions My steering column is from the firebird but it should be pretty close.
I am pretty close, just time is the issue. I hope to have alot more in the coming weeks to finish this build. I will post more pics in the next couple days and im sure ill have a few questions for you guys
Thread
Thread Starter
Forum
Replies
Last Post
neocracka
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Sep 5, 2015 06:50 PM
WTT[NorAtl]: Looking for a cabover truck, 1980s through 1990s
Cherokee_Laredo
Wanted
0
Sep 2, 2015 01:00 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



