stock U-bolts
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Nashville, TN
Posts: 688
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0L HO
stock U-bolts
Can I use my stock U-bolts with the RE 3.5 inch lift springs? This would only be temporary, as I am going to swap out the rearend soon. Just that the U-bolts I ordered with the lift are for the axle i am putting in, not the one i have currently, and i dont want to spend the 40 bux on new ubolts if i can just use my stock ones for a month or so.
thanks.
thanks.
#2
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
Measure the length compared to the ones that came with the lift..If they are the same or real close on length should be ok. If they are abit shorter then you may run into an issue. Just don't let them stay on to long as they are likely weakened from age..
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Sandyman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
16
09-19-2015 07:55 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
09-14-2015 10:57 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)