stock tow package?
Thread Starter
I like it in the dirt
Joined: Jul 2009
Posts: 1,802
Likes: 1
From: Alberta Canada
Year: 2003
Model: Grand Cherokee
Engine: 4.0
So me and my gf are out at my moms diging this stump out of the ground. we dig so far that i can wiggle stump with my hands so i go, ``lets giver her a tug with my jeep``. Bam bends the bumper and the cross bar that holds my hitch! had to beat the shi* out of the bumper to get the liftgate open. WTF? shouldnt i be able to tug on that a little bit?
CF Veteran
Joined: Apr 2009
Posts: 4,734
Likes: 12
Year: 2015, 2012
Model: Grand Cherokee (WK2)
Engine: 3.6L
You exceeded the tow rating of your hitch/bumper with the static (nonmoving) pull on the stump.
Probably should have burned the stump out. You have found out how well all those little root hairs hang on.
I yanked a living cedar tree out of the ground one time with my CJ-7 and a ******-Um-Strap.
Probably should have burned the stump out. You have found out how well all those little root hairs hang on.
I yanked a living cedar tree out of the ground one time with my CJ-7 and a ******-Um-Strap.
CF Veteran
Joined: Dec 2008
Posts: 1,533
Likes: 0
From: eaton ohio
Year: 93
Model: Cherokee
Engine: 4.0
dont feel bad man i got yanked out of a hole with my factory hitch like from the factory and it was all rusted out and it bent lucky it was just the hitch tho, i got a 93 so im sure it was just age that did it to both of ours.
i pulled a stump with my wifes liberty it took about 9 tugs and broke a 15k strap but the hitch held like a champ but its an 03 so rust hasnt taken over it just yet
i pulled a stump with my wifes liberty it took about 9 tugs and broke a 15k strap but the hitch held like a champ but its an 03 so rust hasnt taken over it just yet
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
Stumps are tough. I once couldn't yank a little 4" walnut tree out with my big bad power wagon. Finally gave up on it.
Trending Topics
Senior Member
Joined: Sep 2008
Posts: 897
Likes: 12
From: Sioux Falls, SD
Year: 1999
Model: Cherokee(XJ)
Engine: 4.0L
I was trying to pull old bushes out of my yard once with my Dodge V10 crew cab monster and a logging chain. The bushes all won. Had to borrow the bobcat and dig em out.
CF Veteran
Joined: Feb 2009
Posts: 1,184
Likes: 4
From: Ohio
Year: 1992
Model: Cherokee
Engine: 1995 ZJ 4.0
You exceeded the tow rating of your hitch/bumper with the static (nonmoving) pull on the stump.
Probably should have burned the stump out. You have found out how well all those little root hairs hang on.
I yanked a living cedar tree out of the ground one time with my CJ-7 and a ******-Um-Strap.
Probably should have burned the stump out. You have found out how well all those little root hairs hang on.
I yanked a living cedar tree out of the ground one time with my CJ-7 and a ******-Um-Strap.
What I want to know is how did you bend the bumper? Is the hitch bolted to the bumper? If it is then I don't think that is a factory tow package. More like a Wally World special. The factory hitches mounted to the nut strips inside the frame rails.
MJ>XJ
Joined: Mar 2009
Posts: 17,836
Likes: 7
From: Griffin, G.A.
Year: 1990
Model: Comanche
Engine: 4.0 I6
dig down around it below the ground level... fill with fuel... let it sit alittle so the stump soaks it up... dump alittle more and then light a match... itll burn up into ash pretty much... you may have to hit it around with a shovel but then you just cover the hole!
Member
Joined: Mar 2009
Posts: 170
Likes: 0
From: Oakland Maine
Year: 1999
Model: Cherokee
Engine: 4.0L


