stock steering components, help
#1
Junior Member
Thread Starter
Join Date: Aug 2011
Location: San Diego
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Engine: i6 4.0
stock steering components, help
i am having a hard time figuring out the tie rods and steering components i need to rebuild my front setup. too many options on the sites as far as thread size and rh lh thread, and so on. i need all the joints and tie rods other then the adjusting sleeve both top and bottom.
can someone please give me all the part #s i need?
thank you very much
can someone please give me all the part #s i need?
thank you very much
#5
CF Veteran
Join Date: Jun 2010
Location: Ohio
Posts: 2,117
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 stock
From his build thread... it appears to be an 89 Jeep Cherokee. From the photo in one of the posts it has a T case lever so I'm going to assume 4 wheel drive.
OP are you going for stock replacement parts or upgraded parts?
Stock replacement parts from Autozone...
Tie rod (connects pitman arm to adjustment sleeve) ES2222L
Adjustment sleeve (connects tie rod to drag link) ES2080S
Drag link (Connects adjustment sleeve to passenger knuckle) DS1046
If you want a ZJ linkage here is my post for the autozone parts...
If you want stock replacement parts...
Tie rod end (inner) ES2223R
Tie rod end (outer) ES2221L
Adjustment sleeve DS1045S
OP are you going for stock replacement parts or upgraded parts?
Stock replacement parts from Autozone...
Tie rod (connects pitman arm to adjustment sleeve) ES2222L
Adjustment sleeve (connects tie rod to drag link) ES2080S
Drag link (Connects adjustment sleeve to passenger knuckle) DS1046
If you want a ZJ linkage here is my post for the autozone parts...
If you want stock replacement parts...
Tie rod end (inner) ES2223R
Tie rod end (outer) ES2221L
Adjustment sleeve DS1045S
#6
CF Veteran
Join Date: Jan 2010
Location: Virginia Beach by way of Michigan
Posts: 5,482
Likes: 0
Received 24 Likes
on
24 Posts
From his build thread... it appears to be an 89 Jeep Cherokee. From the photo in one of the posts it has a T case lever so I'm going to assume 4 wheel drive.
OP are you going for stock replacement parts or upgraded parts?
Stock replacement parts from Autozone...
Tie rod (connects pitman arm to adjustment sleeve) ES2222L
Adjustment sleeve (connects tie rod to drag link) ES2080S
Drag link (Connects adjustment sleeve to passenger knuckle) DS1046
If you want a ZJ linkage here is my post for the autozone parts...
If you want stock replacement parts...
Tie rod end (inner) ES2223R
Tie rod end (outer) ES2221L
Adjustment sleeve DS1045S
OP are you going for stock replacement parts or upgraded parts?
Stock replacement parts from Autozone...
Tie rod (connects pitman arm to adjustment sleeve) ES2222L
Adjustment sleeve (connects tie rod to drag link) ES2080S
Drag link (Connects adjustment sleeve to passenger knuckle) DS1046
If you want a ZJ linkage here is my post for the autozone parts...
If you want stock replacement parts...
Tie rod end (inner) ES2223R
Tie rod end (outer) ES2221L
Adjustment sleeve DS1045S
Thread
Thread Starter
Forum
Replies
Last Post
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
03-08-2016 11:33 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)