Sticker on valve cover?
11-20-2011, 01:25 PM
#1
Senior Member
Thread Starter
Join Date: Mar 2011
Location: NEPA
Posts: 613
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Sticker on valve cover?
I was wondering if anyone could answer this question for me. The sticker on my valve cover has a date of '08 on it. The guy I bought it from didn't say anything about the motor being changed. Am I reading the sticker correctly or is there someplace I could look up the sticker? He told the TC was changed so I would think the if the motor was changed he would've said something.
11-20-2011, 01:33 PM
#3
Senior Member
Thread Starter
Join Date: Mar 2011
Location: NEPA
Posts: 613
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
The build date on the jeep is 8/96 so do you think the motor is original? It has the 29 spline 8.25 rear in it. It is an "R" title though, but he said the header panel, grill, etc was all changed out.
11-20-2011, 01:40 PM
#4
CF Veteran
Id say its a 97 thats been swapped in.
The Jeep 4.0 I6 blocks.
Year Casting No
1987-90 53005535
1991-95 53008405
1996-98 53020569
1997-?? 53010341
1999-04 53010449
Starting in 1996 and continuing until the end of their production, main webs of blocks were cast with extra ribbing and given a main bearing girdle to stiffen the motor.
More to come
John
Year Casting No
1987-90 53005535
1991-95 53008405
1996-98 53020569
1997-?? 53010341
1999-04 53010449
Starting in 1996 and continuing until the end of their production, main webs of blocks were cast with extra ribbing and given a main bearing girdle to stiffen the motor.
More to come
John
Here is some info on further dating blocks.
This code is on the block below the spark plug holes.
401MX12
* 4 = Year (1994)
* 01 = Month (January)
* MX = Engine Type/Fuel System/Compression Ratio (MX is a 243 CID, multi-port fuel injection system with 8.8:1 ratio
* 12 = Day of month of engine build
Other code considerations are oversize or undersized components. This information is stamped on the boss between the ignition coil and the distributor.
Undersized
* P = One or more connecting rods bearing journals
* M = All crankshaft main bearing journals
* PM = All crankshaft main bearing journals and one or more connecting rod journal
Oversize
* B = All cylinder bores
* C = all camshaft bearing bores
Source is Jeep Engines, Speed Secrets & Racing Modifications For Jeep-Built 4,6, & V-8 Engines.
John
This code is on the block below the spark plug holes.
401MX12
* 4 = Year (1994)
* 01 = Month (January)
* MX = Engine Type/Fuel System/Compression Ratio (MX is a 243 CID, multi-port fuel injection system with 8.8:1 ratio
* 12 = Day of month of engine build
Other code considerations are oversize or undersized components. This information is stamped on the boss between the ignition coil and the distributor.
Undersized
* P = One or more connecting rods bearing journals
* M = All crankshaft main bearing journals
* PM = All crankshaft main bearing journals and one or more connecting rod journal
Oversize
* B = All cylinder bores
* C = all camshaft bearing bores
Source is Jeep Engines, Speed Secrets & Racing Modifications For Jeep-Built 4,6, & V-8 Engines.
John
Thread
Thread Starter
Forum
Replies
Last Post
cpnwrench
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
05-05-2024 12:21 PM
Blue94xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2023 10:20 AM
ROCKRIDGE 4WD
Vendor Showcase
1
05-23-2016 06:39 PM
toasterknight
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
33
05-21-2016 07:03 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)