Steering Upgrade Questions
#1
CF Veteran
Thread Starter
Join Date: Nov 2008
Location: Oak Harbor, WA.
Posts: 6,989
Likes: 0
Received 4 Likes
on
4 Posts
Year: 1987
Model: Cherokee
Engine: 4.0 liter RENIX I-6, DIY Cold Air Intake, 2.5 FM Exhaust, 3 Core Radiator
Steering Upgrade Questions
Ok, guys so I've heard two really buyable rumors about things I can do to upgrade the steering on my XJ. I have a couple of questions involving these upgrades:
1.) Get the tierod off of a V-8 Grand Cherokee. Ok, Great. What year models of Grands should I look for in the Junkyard to snag the tierod off of??
2.) Get the steering box out of a Dodge Durango. Ok, Great, again. Is this a direct bolt in swap, once I have the steering box out of the Durango?? What year model Durango should i be looking for in the junkyard to get the steering box out of??
Thanks for answering my DFQs guys.
1.) Get the tierod off of a V-8 Grand Cherokee. Ok, Great. What year models of Grands should I look for in the Junkyard to snag the tierod off of??
2.) Get the steering box out of a Dodge Durango. Ok, Great, again. Is this a direct bolt in swap, once I have the steering box out of the Durango?? What year model Durango should i be looking for in the junkyard to get the steering box out of??
Thanks for answering my DFQs guys.
#2
CF Veteran
Any V8 ZJ will work.
Not sure on the Durango year, but it is the V8 model. You will notice a much larger hydraulic cylinder on it. (lots fatter on the round end.)
Yes it is a bolt in
Not sure on the Durango year, but it is the V8 model. You will notice a much larger hydraulic cylinder on it. (lots fatter on the round end.)
Yes it is a bolt in
Last edited by 4.3L XJ; 12-16-2009 at 12:43 PM.
#4
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)