steering column swap then no start
04-11-2011, 08:26 PM
#1
Newbie
Thread Starter
Join Date: Mar 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
steering column swap then no start
i decided to switch out my steering column in my 87 4.0 cherokee with an auto trans, the jeep started fine before i did this, now it wont even roll over. i tried puttin the old steering column back in and it still wont start. im pretty positive i plugged everything back in right and i checked that multiple times. everything else works, it just wont roll over.
where do i start?????
where do i start?????
04-11-2011, 10:03 PM
#4
CF Veteran
Join Date: Feb 2011
Location: Bergen County, New Jersey U.S.A.
Posts: 3,074
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990 Laredo
Model: Cherokee
Engine: 4.0 Inline 6 Renix
it wouldn't hurt to ground it... What year is the new steering column out of...? did you use the same inj switch? can you get the jeep to start off the starter selonoid?
Thread
Thread Starter
Forum
Replies
Last Post
relcock
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-26-2015 11:16 PM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-24-2015 10:24 PM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-23-2015 12:14 PM
Trail-Trekker
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-20-2015 06:26 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)