Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

spacers!

Thread Tools
 
Search this Thread
 
Old Jul 19, 2010 | 12:50 AM
  #1  
zte87's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2010
Posts: 536
Likes: 1
From: anacortes, wa
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default spacers!

So I am about to order a 4.5 rustys kit for my 96 the thing is I have a 2 inch spacer in the front and also a shackles in the rear and I am wanting to know if I left the spacer and and shackles on with the new lift would I run into any probs! The only reason I would want to do this is I have a brand new set of 33-12.50-15 toyo mts sitting in my garage and I need them to fit until I can order some cut out flares! thanks!
Reply
Old Jul 19, 2010 | 12:54 AM
  #2  
99xjbuiltnotbought's Avatar
Junior Member
 
Joined: Jun 2010
Posts: 91
Likes: 2
From: pa
Year: 1999
Model: Cherokee
Engine: 4.0 with 2.5 down pipe and 3 inch custom exhaust runs on propane
Default

i have a 4.5 rc lift with 1.75 spacer an d my 33 12.50 tsl clear just had to do a lil inside fender trim i would look into a sye
Reply
Old Jul 19, 2010 | 12:56 AM
  #3  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Just think about shocks and probaby sye and the off set on your wheels.
Reply
Old Jul 19, 2010 | 12:59 AM
  #4  
zte87's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2010
Posts: 536
Likes: 1
From: anacortes, wa
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

the wheels are 15x8 with 3.75 bs! would I be better of just getting the rustys flares and lift at the same time? I know I should get the sye but could I get away with out it for a while?

Last edited by zte87; Jul 19, 2010 at 01:03 AM.
Reply
Old Jul 19, 2010 | 01:03 AM
  #5  
99xjbuiltnotbought's Avatar
Junior Member
 
Joined: Jun 2010
Posts: 91
Likes: 2
From: pa
Year: 1999
Model: Cherokee
Engine: 4.0 with 2.5 down pipe and 3 inch custom exhaust runs on propane
Default

i did need bigger shocks
Reply
Old Jul 19, 2010 | 01:17 AM
  #6  
91familyxj's Avatar
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

You could try a t case drop but Its anyones guess if it will work. Your wheels are fine. Why nor just trim your fenders?
Reply
Old Jul 19, 2010 | 01:24 AM
  #7  
zte87's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2010
Posts: 536
Likes: 1
From: anacortes, wa
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

ok I lied the coil spacer is 1.75! and the rustys kit comes with a tc drop! I have no problems with cutting the fenders I just want the flares to cover up my hack job! lol I am going to get the rusty flex flares for 350! I should search more but its time for bed so with the 4.5 lift with cut fenders with rustys flare I should be able to flex out with the swaybar disco with out rubbing to bad right! thanks!
Reply
Old Jul 19, 2010 | 09:07 AM
  #8  
Donnie_K's Avatar
CF Veteran
 
Joined: Jun 2009
Posts: 2,173
Likes: 0
From: Columbus, Ohio
Year: 1997
Model: Cherokee
Engine: 4.0, comp cam, 99 intake, apn header, neon injectors, Thunderbolt 2.5" High Flow Cat
Default

bumpstop. And you'll be having to do full leaf packs if you're wanting to keep your shackle on top of it. I think the add a leafs come with new shackles that are half the lift.
Reply
Old Jul 19, 2010 | 09:24 AM
  #9  
zte87's Avatar
Thread Starter
Senior Member
 
Joined: Jul 2010
Posts: 536
Likes: 1
From: anacortes, wa
Year: 1996
Model: Cherokee
Engine: 4.0 HO
Default

I not sure on if I am going with the the rough country or rustys 4.5 either way I will be going with the 4.5 leaf packs! wich lift would you guys go with! I woud go with this http://roughcountry.com/jeep_xj_4x.html or this rustys lift http://rustysoffroad.com/mm5/merchan...ode=sus_xj_kit wich on should I go with?
Reply
Old Jul 19, 2010 | 04:10 PM
  #10  
99xjbuiltnotbought's Avatar
Junior Member
 
Joined: Jun 2010
Posts: 91
Likes: 2
From: pa
Year: 1999
Model: Cherokee
Engine: 4.0 with 2.5 down pipe and 3 inch custom exhaust runs on propane
Default

the rc has more with upper and lower arms and nitro shocks i have the same kit but with fixed lower arms and stock uppers i love it it looks good
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ROCKRIDGE 4WD
Vendor Showcase
6
Jul 13, 2016 12:11 PM
SteveMongr
Cherokee Chat
6
Oct 22, 2015 10:05 PM
studmuffin
Cherokee Chat
8
Oct 5, 2015 01:54 PM
aj2494
Cherokee Chat
14
Oct 2, 2015 02:58 PM
Zach Smith
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 26, 2015 03:24 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 04:38 AM.