hey everyone. so heres the good news i bought a 92 ax15with tranfercase and a new clutch and pressure plate for 130 bucks. the bad news is that the transmission doesnt really work. i put the t case in 2wd and spun the input shaft around through all 5 gears ( so it CAN go into all the gears ok) through every gear it had the same problem. no problems spinning neutral however. with every 360 degree rotation there was a bad spot. the bad spot, meaning i can wiggle the shaft back and fourth with a 1/2 inch of free play, slop, and make a funny noise at this one spot in the rotation. through logical thinking, given i dont know a whole lot about transmissions, i feel like it could be some missing teeth on a universal driving gear? universal because it happens through all the gears at the same spot. the noise i can pinpoint, sounds kinda like excessive gear play, seems to be coming from the front, just behind the input shaft. if anyone knows anything or has any helpful advice it would be much appreciated.

 

can somebody tell me if this is just a dumb question or if its already been answered, i just need some kind of response...