Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Slight Leak - Gasket at TStat Housing

Thread Tools
 
Search this Thread
 
Old Apr 2, 2014 | 04:09 PM
  #1  
jeepxj99's Avatar
Thread Starter
Member
 
Joined: Oct 2011
Posts: 121
Likes: 0
From: Eastern NC
Year: 1999
Model: Cherokee
Engine: 4.0L Straight 6
Default Slight Leak - Gasket at TStat Housing

Yesterday when bypassing the heater core I noticed just a very slight leak coming from the gasket on the Tstat housing. The leak was so slight it basically was just a couple of small beads rolling out.

Was wondering if a leak that small could be quickly stopped by applying a tad of Blue RTV Gasket maker right over top of the leak?

While i'm asking, does anyone know the best way to plug the pipes left exposed from the heater core?
Reply
Old Apr 2, 2014 | 08:32 PM
  #2  
Ant.'s Avatar
Member
 
Joined: Aug 2013
Posts: 217
Likes: 1
From: Davie, FL
Year: 1999
Model: Cherokee
Engine: 4.0
Default

Go and pick up a new gasket for a couple bucks, Mine as well put a new thermostat while your there for a few more bucks, Don't half ***** when it comes to the cooling system.. Just my opinion...

As far as blocking the heater core, There are caps you can get for that.. I do not suggest using these caps for plugging water pump side.. Get a heater hose and put a bolt through it with a clamp, The caps always split or rip in a short time and will just cause problems short time down the road..

Last edited by Ant.; Apr 2, 2014 at 08:35 PM.
Reply
Old Apr 2, 2014 | 11:59 PM
  #3  
freegdr's Avatar
CF Veteran
 
Joined: Mar 2010
Posts: 47,923
Likes: 38
From: Broward County Fl.
Year: 1989 xj sport 2dr
Model: Cherokee
Engine: 12 hole bosch Injectors
Default

Originally Posted by jeepxj99
Yesterday when bypassing the heater core I noticed just a very slight leak coming from the gasket on the Tstat housing. The leak was so slight it basically was just a couple of small beads rolling out.

Was wondering if a leak that small could be quickly stopped by applying a tad of Blue RTV Gasket maker right over top of the leak?

While i'm asking, does anyone know the best way to plug the pipes left exposed from the heater core?
NO ....And just by a 5/8 and 3/4 rubber cap and clamps.
Reply
Old Apr 3, 2014 | 01:33 PM
  #4  
Ianf406's Avatar
CF Veteran
 
Joined: Feb 2010
Posts: 3,353
Likes: 1
From: Missoula, MT
Year: 1999
Model: Cherokee
Engine: Golen 4.6 Stroker, AFE Headers, 62mm TB, 24 LB Injectors, Brown Dog kit, HF Cat, 3" Exhaust
Default

It is two bolts and a harness... just buy the cheap gasket and replace it. If you have a few extra bucks, put a new T-stat in there as well.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
JayneCobb
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
26
Aug 11, 2020 03:22 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
Feb 28, 2016 02:05 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
Sep 13, 2015 06:06 PM
seanie11
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
Sep 11, 2015 04:42 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 06:22 PM.