Has anybody replaced their internal slave and gotten a faulty one?

 

ive replaced mine three time in 15 years never got a bad on wore them all out

 

I have had to replace mine but never gotten a bad one. Doesn't mean that you couldn't get a bad one.

 

I just replaced it w a new clutch. Got 600 miles on it and its making a noise like the throwout bearing is bad. The slave has a bearing internally right?. When I press clutch pedal in noise goes away.

 

when you replaced the clutch did you replace the throw out bearing? It's typically a good idea to replace the throw out bearing when you replace the clutch as you already have it that far apart. I know that with mine my throw out is going bad and I still have the original clutch... will need to replace mine soon.

 

Its better to get a seal kit and do it your self. Reason why? On reman kits they bore out the inside and use standard size seal kits. Leave a gap for leaks. Remove the c-clip, clean out the inside with emrory cloth and install the new seal kit.

 

Isn't the throwout bearing built into the slave?

 

Shouldnt be lol

 

There is nothing on the trans shaft but the slave.

 

When I replaced slave on my 92 yrs ago was only slave also. No separate throwout bearing

 

Just looked up and I was correct. Slave and bearing all one unit