NITTANY NATION

Ok I have a dumb question, I'm about to replace my serpentine belt. After I loosen the 4 bolts holding the power steering pump, should I just be able to swing it by hand, and is the tensonor bolt just for final adjustment? Thanks for your help.

wahoo

You should not have to loosen the pump just the tensioner pulley.

ehracing67

On the 4.0 loosen the tensioner pulley about 3/4 turn, then turn down the adjust above it. That will move the pulley down and loosen the belt enough to remove it.

meancherokee

this is what I always do. works everytime

salad

What year Cherokee? 99+ is via a tensioner pulley with the adjustment bolts, older models (square tube looking intake manifold instead of a big round hump under the throttle) you have to loosen the bolts of the power steering pump.

NITTANY NATION

Sorry, it is for a 92 stariaght 6 cherokee, my haynes book says to loosen the power steering pump.

dan8yourv8

no need to do power steering just loosen the tensioner pulley then back off the tension and go a little extra for the fitment of the new belt

F1Addict

Maybe true for other years but on your 92, you'll need to loosen the bolts on your power steering pump and then back the tensioning adjustment bolt out until you can slip the belt off. Just did it on my '89 last week to replace the harmonic balancer.

dan8yourv8

maybe true havent worked much with older ones 95% of what ive done is on the 97-01

NITTANY NATION

Perfect, thanks for your help. I'll see how it goes tomorrow

salad

Yep this is correct

peep

This is the tool construction I use to acces the tension adjust bolt under the power steering pump on my 89. Allows me a decent swing in tight spot and I can keep the socket engaged without trying to contorsion my other hand down in there.

freegdr

remove factory air box and aux fan better acess and you have to turn the adjuster to get belt off will not move by hand

NITTANY NATION

New belt and idler pulley on, no squeal or weird sounds. Thanks for eveyones help.