I've been redoing my floors and had to remove the front passanger seat. I put the hardware in a special place, thinking I'd know right where they were when I needed them again.

I was wrong.

Now I need new hardware. Anyone know what nuts and bolts I need to pick up?

 

if you have a wrecking yard near by, just go there

 

I thought about that, but the hardware I pulled off was pretty crappy, and I don't have very high hopes that junk yard parts would be any better.

Which is why I wanna go with new stainless hardware.

 

http://www.teamcherokee.com/

not stainless but you can by the bolts you need.

 

Could you just measure your hole on the track and swing by tractor supply or simalar store to grab something.Getting it at a junkyard would be pretty stupid like you said all rusty and crap.g/l (Sry spelling)

 

Thanks for the link, but I'd rather not wait, I'm in a big city, plenty of hardware stores around. I just don't know what size to get.

Shoot, I think I was a bit unclear with the first post.

Nothing was left in the truck, not even the track. I just unbolted the entire unit. It was 2 nuts in the front, 2 bolts in the back.

I think what I'll have to do is snag one front and one back from the driver's side and head up to the hardware store. I just hope they come off easy and are the same size. I soaked the pass side in blaster for a couple days before even attempting.

I was also hoping I could get an answer from someone so I could just swing by a store on my way home. I'm not driving the Cherokee every day yet, so I'll just have to stop at home unless someone can help me out before 5 pm.

 

I'd go out and measure mine but the ol' lady has it today If you dont have answer when she gets back I'll go measure it.

 

Nice, thanks man! I'll be waiting anxiously!