Seafoam???
Thread Starter
Junior Member
Joined: Dec 2008
Posts: 86
Likes: 0
Year: 1990
Model: Cherokee
Engine: 4.0 Inline 6
i want to use a bottle of seafoam, i just have 2 questions, one can it harm the engine in any way, and 2 i want to but it into the intake to make it smoke, what vacuum do i put it in?
Senior Member
Joined: Mar 2010
Posts: 812
Likes: 1
From: Eugene, OR
Year: 1989
Model: Cherokee
Engine: 4.7 Stroker I6
omg................ WHY, every 3 days theres a seafoam thread....
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
Use the brake booster line, just like they do....
I've done it to more than a dozen cars and every one has had good results, none bad. Some say it can harm your o2 sensor, I've been pulling my o2 sensor out when doing it recently, don't have to though.
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
Use the brake booster line, just like they do....
I've done it to more than a dozen cars and every one has had good results, none bad. Some say it can harm your o2 sensor, I've been pulling my o2 sensor out when doing it recently, don't have to though.
CF Veteran
Joined: Jan 2009
Posts: 1,242
Likes: 4
From: Northfield MN
Year: 1995
Model: Grand Cherokee
Engine: 5.2 v8
Never had it harm an engine, and x2 on the booster line. Dont forget to toss some in the tank also.
As for the o2 sensors, again never had an issue with it messing them up either......
As for the o2 sensors, again never had an issue with it messing them up either......
Senior Member
Joined: Oct 2009
Posts: 633
Likes: 0
From: Sutton, New Hampshire
Year: 1995
Model: Cherokee
Engine: 4.0L
From http://mechdb.com/index.php/Seafoam:
Under proper usage as instructed both on the Seafoam site and the Mech DB site I posted above, you should not have any problems using Seafoam.
Concerns
As with any product, negative effects are always a possibility, but only under rare cirumstances such as:
As with any product, negative effects are always a possibility, but only under rare cirumstances such as:
- Hydrolocking the engine: This is not possible to do through an ordinary vacuum line because not enough Seafoam can be drawn without stalling the engine first. The only way is if the etire can is somehow emptied by other means very quickly or if too much is poured into the spark plug openings (see above).
- Heat warping valves: Some claim that injecting Seafoam directly will cause a lot of stress on the valves by cooling them too quickly and result in warping. Valves are already cooled slightly by the fuel and intake charge as it passes by them and are designed to handle the temperature difference. This scenario is unlikely.
- Dropping a valve seat: On certain engines which are prone to valve seat failure, using Seafoam might provide the slight temperature difference needed to get the valve seat lose and end up in complete engine failure. An example of this happened on a Ford Escort after running Seafoam.
- Creating leaks: Whether compression or oil leaks, some can develop on rare occasions if the engine is held together by dirt and Seafoam cleans that dirt away. Also a very rare scenario, as experience shows that running seafoam through 4 cylinder engines with even 200-300 thousand miles does not create negative effects.
- Releasing contaminants into oil: If the engine contains excessive amounts of sludge, what can happen is some of the sludge that would otherwise stay in place will get freed up from the use of Seafoam and begin to travel throughout the oil system. Ruining bearings, clogging up filters, and clogging up the oil sump screen mesh, effectively starving the engine of oil. This is why the procedure should only be performed just prior to changing the oil and oil filter.
CF Veteran
Joined: Aug 2008
Posts: 6,588
Likes: 495
From: Chico, CA
Year: 1986
Model: Cherokee
Engine: 4.3L with headers and full 3" exhaust system
There have been two users on this forum that have knocked out their O2 sensors by pouring it in the intake since I have been on it. First off, you do not need to make white smoke. All you need to do is pour it in the tank like the Smog guys here in CA do and drive. It will do its thing and clean out the carbon. The white smoke is unburned Sea Foam, not carbon and in sufficient quantity will take out the O2 sensor. Just pouring it in the tank works, as I have verified with a tear down immediately afterwards.
CF Veteran
Joined: Jan 2009
Posts: 2,199
Likes: 1
From: Britt, MN
Year: 1998
Model: Cherokee
Engine: 4.0
There have been two users on this forum that have knocked out their O2 sensors by pouring it in the intake since I have been on it. First off, you do not need to make white smoke. All you need to do is pour it in the tank like the Smog guys here in CA do and drive. It will do its thing and clean out the carbon. The white smoke is unburned Sea Foam, not carbon and in sufficient quantity will take out the O2 sensor. Just pouring it in the tank works, as I have verified with a tear down immediately afterwards.
CF Veteran
Joined: Nov 2009
Posts: 1,262
Likes: 0
From: Conroe, Texas
Year: 1997
Model: Cherokee
Engine: I6
omg................ WHY, every 3 days theres a seafoam thread....
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
Use the brake booster line, just like they do....
I've done it to more than a dozen cars and every one has had good results, none bad. Some say it can harm your o2 sensor, I've been pulling my o2 sensor out when doing it recently, don't have to though.
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
http://www.seafoamsales.com/how-to-u...treatment.html
Use the brake booster line, just like they do....
I've done it to more than a dozen cars and every one has had good results, none bad. Some say it can harm your o2 sensor, I've been pulling my o2 sensor out when doing it recently, don't have to though.
Trending Topics
Junior Member
Joined: Mar 2010
Posts: 50
Likes: 0
From: Gates,NC
Year: 1995
Model: Cherokee
Engine: 4.0L inline 6
never had a problem with seafoam and I have put it in everything from a 2002 Honda accord to a '97 F250 diesel to a honda 4 wheeler , I always changed my oil and checked my o2 sensor afterwards but its not really a requirement I dont think. I'll probally do that to my jeep as well to finish up my tune up
Senior Member
Joined: Oct 2009
Posts: 633
Likes: 0
From: Sutton, New Hampshire
Year: 1995
Model: Cherokee
Engine: 4.0L
https://www.cherokeeforum.com/search...earchid=846702
From a Google search:
Really long link shortened to something manageable
The dearth of information available on a given topic as popular as Seafoam is incredible, and it takes, at most, 30 seconds to search. That's the issue. Excess posts take up forum space and can push unique threads off the first page, where they're less likely to be seen. A simple search returns info quicker for the user than making a thread to ask the same question, and it saves everyone else the time of having to answer that question...again.
OP, I'm assuming you're new here, no harm no foul. But utilize the search function first if you have a question. It can return a lot of info!
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
28
Jan 8, 2025 11:36 PM
beabout
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
14
Jul 6, 2018 11:10 AM
1stTimer
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
15
Feb 2, 2016 02:25 AM
libengan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
14
Nov 6, 2015 09:16 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



