i put a rugged ridge steering on mine to get rid of that funny shapped y design. it hooks both wheels together then the gear box comes down to the r/f outer tie rod. bump steer is gone but now it feels like the gear box is loose is this normal for this kind of steering?

 

notihg is loose in the areas you changed right might be the steering is better than before

 

the loose feeling is called tie rod roll. it occurs on the pass side knuckle. get this, it will stop it. http://www.jcroffroad.com/Merchant2/...tegory_Code=S6

 

thank you. i thought maybe i had just gone crazy

 

why would thatnot come with the steering ?

 

i dont know. some companies are better than others.

 

i was lookin at that piece from jcr offroad there steering u have to drill out the spindel so will that bushing still work on mine since i didnt have to drill mine out

 

yes

 

89elliminator YOU ROCK!! I have the same setup and that rolling has been driving me nuts!! Just ordered a set. Can't wait to try them!

 

do i put them on both sides or just one like they do on there steering

 

if you get them before i let me know how they do

 

you just need one for the passenger side knuckle.

 

cool thanks

 

ok they showed up today so now i just got to put it on and its cold out. ill post up once i get it on

 

ok got it put on yesturday steering is a lot tighter now. but now my bumpsteer is a little worse than it was before. i almost had it all gone now it almost like it was before i put the steering on. what do i need to do now?