ROCKY ROAD OUTFITTERS lift
#1
"CF Moderator"
Thread Starter
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
ROCKY ROAD OUTFITTERS lift
Hi all, anyone have one of these lifts or heard about them. I want to add it to my 3in zone kit with new LCA's (2 inch kit) and have a chance to get the whole new kit (3 inch) for $60 from a friend...Tj
#5
Newbie
Join Date: Jul 2009
Location: Kentucky
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
I have used rocky road for samurai parts. I will not buy anything from them again. Their parts are not that good. I have had 3 shock mounts break ( bolt welded on angle iron ) their welds don't hold. I welded them back on and no problems. I am waiting for the fourth to brake, maybe the person who made it knew how to weld. lol. 2 tie rod ends that don't take grease, right out of the box. The front spring relocation bracket have a long bolt with jam nuts instead of spacers, shackles with egg shaped holes. I would buy from someone else. RRO = bad quality
#6
most of their parts suck. but you cant really screw up coil spacers and shackles. If you are getting them second hand i say go for it.
beware though, im not sure yout your current zone offroad kit contains, but be prepared to buy new shocks, brakehoses,sye,cv shaft,trackbar,upper control arms.
beware though, im not sure yout your current zone offroad kit contains, but be prepared to buy new shocks, brakehoses,sye,cv shaft,trackbar,upper control arms.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Rich164
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
09-08-2015 08:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)