Ebay has 44K.

That's how you burp your baby.

 

You sure it's not "E8TE" ?

I don't seem to have much of a problem filling mine parked with my front wheels about 10-12 inches higher than my rears. Guess that lets the air move forward and out. Hot and cold once or twice....do leave the bottle 1/2 empty. Gotta' leave some air in there to compress.

 

ive personally burped it level...may not be the best way to do it, but i just let the bottle get full, let it run to almost OT via the temp gauge, cut it off, and pull the cap on the pressure bottle...i figure the steam from boiling water (i mix mine...60/40 because weather here has been colder then usual) and just refill it about half way. do it 2-3 times and it seemed to be pretty well burped. but thats just my 2c, i know theres more of a proper way to do it lol

 

I never burp them personally. Use a good cap, the 703-1396 from Napa. Fill the bottle 1/2 full and run it. after it's heated up once, top off the bottle.

 

Around here NAPA had it. Not sure if they still do, haven't looked for a while. The other parts stores (autozone, etc) I know do not.