Replace cam sensor due to code PO340 still having sane problem
Thread Starter
Newbie
Joined: Aug 2010
Posts: 4
Likes: 0
Model: Cherokee
Replace cam sensor due to code PO340 still having sane problem
I have been having problems with stalling and starting. Truck threw a code for camshaft positions sensor - bank 1 circuit malfunction. I replaced the sensor but I am still having the same problem. Is there something I am missing. Is it a faulty code? What else should I check. Afraid of doing engine damage with the stalling. Thanks
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
I'm not one who will be much help here, but you should post what you have and maybe check your grounds and wiring, especially the connectors. On older Jeeps that connector on the CPS is known to cause trouble.
Thread
Thread Starter
Forum
Replies
Last Post
95cherokee89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
59
Oct 16, 2015 03:17 AM
moparchero
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 26, 2015 12:58 PM
Ye Ol' Cherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
Aug 22, 2015 01:43 PM
CCKen
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
Aug 20, 2015 08:07 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)