mystery wires after engine swap
08-20-2015, 09:52 PM
#1
Newbie
Thread Starter
Join Date: Apr 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
mystery wires after engine swap
1998 4.6 AX-15 Looking for some help identifying two wires that I cant figure out what to do with. They are behind the alternator and shoot off from the ignition coil pigtail. I just finished up my 4.6 and now I cant get it to run. No spark and no fuel. New mopar crank sensor, new cam sensor. All grounds have been cleaned and checked. Not getting switched power to the ASD relay. Three different computers with no change. Looking for any help I can get. Thanks in advance.
08-21-2015, 08:48 AM
#2
CF Veteran
Join Date: Sep 2012
Location: In a large sandbox
Posts: 1,623
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1998
Engine: 4.0
1998 4.6 AX-15 Looking for some help identifying two wires that I cant figure out what to do with. They are behind the alternator and shoot off from the ignition coil pigtail. I just finished up my 4.6 and now I cant get it to run. No spark and no fuel. New mopar crank sensor, new cam sensor. All grounds have been cleaned and checked. Not getting switched power to the ASD relay. Three different computers with no change. Looking for any help I can get. Thanks in advance.
Thread
Thread Starter
Forum
Replies
Last Post
Blazeorange
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-26-2015 11:32 PM
smithj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
08-23-2015 12:14 PM
Tom95YJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
08-21-2015 06:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)