renix problems!!! new to the fourm

Subscribe
Jun 16, 2014 | 04:16 PM
  #76  
Got cruise control?
Reply 0
Jun 16, 2014 | 04:17 PM
  #77  
I feel like I shouldn't be able to see the spring in the cable but I can....
Reply 0
Jun 16, 2014 | 04:18 PM
  #78  
yes i have abs which is gone, cruise control, all power everything.
Reply 0
Jun 16, 2014 | 04:20 PM
  #79  
Quote: yes i have abs which is gone, cruise control, all power everything.
Follow the cable. Where does it go? A new pic would be helpful....
Reply 0
Jun 16, 2014 | 04:32 PM
  #80  
<p>goes into the firewall will try to post a pic phones acting stupid</p>
Reply 0
Jun 16, 2014 | 04:45 PM
  #81  
http://s1290.photobucket.com/user/dy...tml?sort=3&o=0
only way it would let me post
Reply 0
Jun 16, 2014 | 05:09 PM
  #82  
Accelerator cable. Replace it.
Reply 0
Jun 16, 2014 | 05:18 PM
  #83  
thank you... I think this thread has come to an end!
Reply 0
Jun 16, 2014 | 05:21 PM
  #84  
Maybe..... After you fix that, will your TPS need adjusting??
Reply 0
Jun 16, 2014 | 07:09 PM
  #85  
I'm sure the tps will need adjustment as well as the throttle body butterfly screw!
Reply 0
Jun 18, 2014 | 01:02 PM
  #86  
I gather normally that butterfly only needs adjustment if somebody messed with it.
Reply 0
Jun 18, 2014 | 02:58 PM
  #87  
changed the cable, all is almost well ha... I think with all the homebrewed remedies the po had on here, I'm sure he messed with the screw. Its stripped out any how, so some one messed with it. Coolant bottom decided to take a dump and leak from the cap again. Po remedy use electical tape around the threads... I had a gang of problems but idle isn't one anymore.
Reply 0
Jun 18, 2014 | 03:00 PM
  #88  
tps needed adjustment, that accelerator cable can keep the butterfly from closing so...
Reply 0
Jun 18, 2014 | 03:03 PM
  #89  
thanks a bunch, you guys helped in ways no one else could! i just hope your not tired of me and my questions... Hopefully not too many more!
Reply 0
Jun 18, 2014 | 04:31 PM
  #90  
Quote: changed the cable, all is almost well ha... I think with all the homebrewed remedies the po had on here, I'm sure he messed with the screw. Its stripped out any how, so some one messed with it. Coolant bottom decided to take a dump and leak from the cap again. Po remedy use electical tape around the threads... I had a gang of problems but idle isn't one anymore.
We told you about the good cap for the coolant bottle, right?
Napa 703-1396.
Reply 0