Renix idle
#1
Newbie
Thread Starter
Join Date: Jul 2018
Location: Dfw
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Renix idle
1990 4.0 5 speed, runs good but has high idle after warm up about 1500 rpm new IAC and a vacuum leak repaired so high idle when warm. Anything ossicular with renix idle?
#2
Senior Member
Any codes? Do you have the ability to put a scanner on it? Sure would be nice to know what some of the readings are.
Have you checked the vacuum lines or put a vacuum gauge on it? Sounds stupid, but have you checked for any obstructions or binding with the accelerator cables? Make sure the throttle is closing like it should.
Have you checked the vacuum lines or put a vacuum gauge on it? Sounds stupid, but have you checked for any obstructions or binding with the accelerator cables? Make sure the throttle is closing like it should.
#3
::CF Moderator::
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,876
Received 1,526 Likes
on
1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
They don't throw codes.
OP needs to visit www.cruiser54.com and complete tips 1,3,4, and 5 first. Then, test the throttle position sensor.
OP needs to visit www.cruiser54.com and complete tips 1,3,4, and 5 first. Then, test the throttle position sensor.
Thread
Thread Starter
Forum
Replies
Last Post
Chad'sCheep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
21
01-04-2016 09:39 PM
Kamaran
Wanted
4
03-11-2015 04:03 PM
scoob
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
06-04-2010 02:09 PM
deepstage69
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
03-18-2010 07:48 PM
88GTBlack
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
03-08-2010 03:14 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)