removing engine questions
#1
Senior Member
Thread Starter
Join Date: Sep 2008
Location: Ga
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 inline 6
removing engine questions
i am removing the engine harness.is there a way to take the electrical conections off without breaking the clips by the fuel injectors?
#4
CF Veteran
Join Date: Sep 2009
Location: ☼ Blackhole Sun
Posts: 8,567
Likes: 0
Received 18 Likes
on
16 Posts
Year: My Jeep is a GMC
You have to slide the wire out from the connector before you can remove it. When you do this you more than likely will damage the plastic. You can retrofit to the new style that you simply push on the wire bail with your thumb and they will pull right off. You can buy the tool at NAPA to release the terminals from the old connectors.
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
CYTEHTR
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-30-2015 08:29 PM
David Chauncey Clothier
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
08-29-2015 09:31 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)