has anyone ever taken off if there doors and made it so you can ut them back on if so any advice and price

 

Yes, I just did this.

Door side.

 

Have you noticed any downfalls to having your doors removable such as the door not closing properly or anything.

 

where would you get the parts to do this and was it really hard

 

All you need is a rotary tool like a dremel and the cutting wheel attachment.

 

http://heavymetalxj.wordpress.com/2007/08/03/6/

no sagging, no frames twisting

 

i cant remember exactly where (just search) but there is an awesome right up on jeepforum.com

i printed it all off and have been wantin to do it very badly. But winter is almost here so i might put it off till next year.

do the one that is called "another approach at removing doors" or something like that. That write up is way better than the other one that is on there. And has a better end result IMO.

 

No problems. I love it.

 

Do you have any play in the door since you made the doors removable?

 

is it reall worth it doing this or is just another thing to break

 

its less stuff to break

you take them off before wheeling and they never get dented!

 

true very true never thought about it that way

 

Negative. I also pressed the pins out and replaced with grade 8 bolts that are a bit smaller in diameter. Ill get the sizes tommorow for you.