ok i have a 1991 jeep cherokee xj and i blew the engine up and now i get a 94 engine rebuilt it bored it out and ported the head and put it in hooked every thing up ! wont start it will turn over but wont start not getting any spark at all coil is fine every thing works and is fine nothing wrong with any thing just i have the wiring or something messed up i have no idea what to do im terrible at wiring i dont have a wiring harness diagram for 91-95 if any one could please help me i would be so happy im tired of walking every where and paying people to take me places and its getting cold i need my baby to run!

 

sounds like you have bad wiring...

Also, you're running an H.O. engine in a Renix truck... you ecu is could be the wrong one, but you should still get spark.

 

90 was the last year for renix

 

im sorry but none of that helps me =[ lol i know im bad at wiring
is there any one that can tell me how to get a wiring diagram for it? iv looked every where idk what else to do

 

Check E-Bay for tech manuals I,ve seen them on there before.

 

did you plug every plug back in the right place ? did you plug the CPS located ontop between the belhousing and engine on drivers side ?
Have you double checked every plug on engine ?have you checked all the fuses ?

 

yea i checked all of them and there are 2 plugs that arnt plunged in and they are on the passenger side on a really long piece of wire and on the end there are 2 plug ins one has 2 holes and the other one has 2 prongs coming out of it and the whole thing plugs in to the main wiring harness

 

im guessing you need to post pics... i have no idea what plugs you are talking about... maybe someone will chim in... but im sure pictures will help

 

alright ill get some pics up can any one else help me?