rear main thought i nailed it but.....

Reply Subscribe

Thread Tools

Search this Thread

Nov 2, 2010 | 05:56 PM

#31

7urtle

Member

Joined: Oct 2009

Posts: 132

Likes: 0

From: 708-312

Year: 1999

Model: Cherokee

Engine: 4.0

Quote:

Originally Posted by Jamie57

beat me to it. I was going to recommend Hi tack too.
It's kinda like a contact cement.
Very sticky and when applied on a clean surface it will hold the gasket in place so when your putting the pan in place it doe'st move on you.

ive never seen it

Nov 2, 2010 | 06:38 PM

#32

freegdr

CF Veteran

Joined: Mar 2010

Posts: 47,923

Likes: 38

From: Broward County Fl.

Year: 1989 xj sport 2dr

Model: Cherokee

Engine: 12 hole bosch Injectors

Quote:

Originally Posted by jkrause

Got it done. Leaks a little but not from the rms. !!!

take a 1/4 or 3/8 extension and tap it with a hammer in the aera thats leaking should stop tap on the lip of the pan tap not beat

Nov 7, 2010 | 06:33 AM

#33

fishfast41

Junior Member

Joined: Oct 2010

Posts: 37

Likes: 0

From: Menomonee Falls, Wi

Year: 1993

Model: Cherokee

Engine: 4.0 HO

I've always used Napa Weatherstripping Glue tohold stubborn gaskets in place while installing them. Works pretty good

Nov 7, 2010 | 06:54 AM

#34

Littlethunder92

Seasoned Member

Joined: Oct 2010

Posts: 379

Likes: 2

From: Jersey

Year: 1994

Model: Cherokee

Engine: 4.0

i just did mine on a 92. i remember reading the instructions for the RMS and it said for the newer Xjs you have to use a lot of rtv to fill up the gaps? I threw the instructions out but this could be your problem?