Rear End Sagging
Thread Starter
Junior Member
Joined: Aug 2012
Posts: 66
Likes: 0
Year: 1998
Model: Cherokee
Engine: 4.0
Rear End Sagging
Is this what I need to fix my rear end sag?
http://www.quadratec.com/products/56010_11.htm
I'm looking for whatever they usedd here..
http://www.jeepforum.com/forum/f11/0...dvice-1007450/
http://www.quadratec.com/products/56010_11.htm
I'm looking for whatever they usedd here..
http://www.jeepforum.com/forum/f11/0...dvice-1007450/
Seasoned Member
Joined: Apr 2013
Posts: 282
Likes: 0
From: Boston
Year: 2000
Model: Cherokee
Engine: 4.6 stroker
That's the ones I replaced mine with
Crown HD
Advice: pb blaster for a month before attempting this.
2hours install. Ha.
Mine took 6 hours but didn't snap any bolts(except lower shock stud )
Eye bushings were seized had to cut with grinder.also inspect your shackles my pass. Side was rotted .
Its a one man job though
Watch out for breaker bar slipping! Just missed!
Crown HD
Advice: pb blaster for a month before attempting this.
2hours install. Ha.
Mine took 6 hours but didn't snap any bolts(except lower shock stud )
Eye bushings were seized had to cut with grinder.also inspect your shackles my pass. Side was rotted .
Its a one man job though
Watch out for breaker bar slipping! Just missed!
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
Nov 7, 2015 01:22 AM
RickJames Bish
Modified XJ Cherokee Tech
5
Sep 2, 2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)