hey this is totaly random but I just swapped in a brand new I6 4.0 manual trans and the only thing I lost was the upper bolt for the power steering pump bracket .......any chance one of you know the thread size and length of this bolt ?

 

Maybe this helps

http://www.factorychryslerparts.com/...ukey_make=1064

 

well that shows the pic but does not tell me the size,,,,great site for info tho

 

if you scroll down the list is gives the dimensions on #6 if that is the one you are missing

 

Hey! Neat link...but I couldn't find #9,#9, #9...one other was 3/8-coarse, (16 tpi). Top one looks long, I bet a 4" could be cut to fit..

I wonder if it's on 5-90's page?

 

Scroll down....

 

on bolt #9, I had to take mine out because of the adjuster underneath needing to be replaced. If my memory serves me correctly I used a metric wrench on it, I can't recall exactly but 12-14mm so I would think an 8mm x 1.25 x 75-85mm would get you close. It was about 3 to 3.5 inches long but the same size as some of the shorter bolts on my 96.