Question about 4wd linkage?
02-18-2010, 10:10 PM
#16
CF Veteran
Join Date: Nov 2008
Location: Paso Robles Ca
Posts: 2,473
Likes: 0
Received 9 Likes
on
9 Posts
Year: 1991
Model: Cherokee
Engine: 4.0
this pick is looking from back to front
check the holes in the bottom
the bolts for the trany Mount are offset to the driver side
and should be mounted in the middle holes
as the arrows show
check the holes in the bottom
the bolts for the trany Mount are offset to the driver side
and should be mounted in the middle holes
as the arrows show
02-26-2010, 01:12 AM
#19
Member
Thread Starter
Join Date: Dec 2009
Location: Michigan
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 L6
No not yet rigged it up so only have 4hi and 2hi. If I go in 4lo linkage pops out. I looked at my crossmember and it looks like it leans to the passenger side. I do have two broken studs on my crossmember to frame.
Thread
Thread Starter
Forum
Replies
Last Post
aroundincircles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 11:12 AM
hogans 96xj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-13-2015 09:11 PM
nicksan
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-07-2015 08:08 PM
mtoskippy
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
0
09-03-2015 09:21 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)