put gas tank back in =few questions
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 74
Likes: 0
From: UpperMichigan
Model: Cherokee
Engine: 4.0
89 cherokee 4.0 added 8 gal gas won't fire. How long should it take to get gas to motor.
I may have drained line I ran it for a minute or so when tank was off a few times.
I've tried to start in about 4 times. 10 - 12 sec. each time. Thanks Ken
I may have drained line I ran it for a minute or so when tank was off a few times.
I've tried to start in about 4 times. 10 - 12 sec. each time. Thanks Ken
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Did you get it? You should hear the pump run 2 seconds or so when you turn the key to ign. After doing that a few times it should be primed...
Last edited by DFlintstone; Oct 31, 2014 at 08:15 PM.
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 74
Likes: 0
From: UpperMichigan
Model: Cherokee
Engine: 4.0
should have lines on right , they were different sizes. I heard the pump when I turned key on. First two times I tried starting it only had 3-4 gals in tank since then added another 5 gal. Play with it again in morning. Thanks Ken
CF Veteran
Joined: Aug 2011
Posts: 10,489
Likes: 24
From: Nor-Cal Coast
Year: 90,84
Model: Cherokee
Engine: 4.0,2.5
Maybe Ken Pm'd you? In any case, you are aware if the test port on the fuel rail, has a deal like a tire valve, (Schrader valve). You can depress the deal with a key or whatever to see if there is fuel there.
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 74
Likes: 0
From: UpperMichigan
Model: Cherokee
Engine: 4.0
Thanks I was wondering if there was someway to check it out.
I have my other truck a 04 gmc down with transfer case problems. Hole in side of it. 4 wheel drive not working at all. Do I dare drive it that way and not do any other damage? Thanks Ken or Hoot
I have my other truck a 04 gmc down with transfer case problems. Hole in side of it. 4 wheel drive not working at all. Do I dare drive it that way and not do any other damage? Thanks Ken or Hoot
Trending Topics
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 74
Likes: 0
From: UpperMichigan
Model: Cherokee
Engine: 4.0
That is what I'm using and it is taking metal off but not turning, trying to not
screw it up. It should free up. Every time I spray it I also try starting it hear the pump kick on. Hasn't fired yet. Will use small torch tomorrow.
Hoot
screw it up. It should free up. Every time I spray it I also try starting it hear the pump kick on. Hasn't fired yet. Will use small torch tomorrow.
Hoot
Thread Starter
Junior Member
Joined: Jan 2013
Posts: 74
Likes: 0
From: UpperMichigan
Model: Cherokee
Engine: 4.0
Yes, that is the cap I'm trying to loosen so I can get at the valve. Will try again tomorrow a time or two. Heading for camp in PM son will take me out and drop me off. Back in town Wed. evening. Thanks all Hoot



