Problems after t/c drop
08-22-2010, 01:40 PM
#1
Senior Member
Thread Starter
Join Date: Jun 2010
Posts: 702
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0
Problems after t/c drop
I put in a 1" transfer case drop on my jeep.. and now it seems like the shifter linkage is binding a bit and not properly going into 4wd or 4Lo (it chatters in 4HI, and pops out of 4Lo). Ive tried adjusting the linkage and that helped a bit, but it still doesnt seem right..
any ideas?
any ideas?
08-22-2010, 02:21 PM
#2
CF Veteran
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
I had the same problem after my drop. I ended up fabbing a bracket out of 1/8" aluminum to drop the linkage 1" and it solved the problem.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
MidwestNick
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
10
02-28-2016 02:05 AM
Ricardo Siqueiros
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-03-2015 09:17 PM
Jeepy11
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-03-2015 09:32 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)