so my power steering pump(PSP) is starting to go bad its kinda hard to explain but it has a aluminum bracket it attaches to. i work at a junk yard and i took one out of a 95 cherokee today and that PSP has a metal bracket and an belt tensioner pulley under it.. so my question is will the PSP off the 95 cherokee fit on my 93 cherokee? if so do i just take the pulley off it??? idk what to do if this doesnt fit right, im just gonna buy a brand new if i cant figure it out but im hhoping you guys would voice ur opinion. i'll post pic to help you.. the first pic is the mounting bracket in my 93 and the second pic is the metal mounting bracket out of the 95. thanks again
josh

 

If the pulleys are both the same--plastic or metal-- you should be ok! Take the brackets off of them, and check to see if the mounting bolts thread in or bolt thru . If they are still the same your good to go!

 

ok cool. on my '93 its the plastic pulley i guess i didnt put a magnet to it yet but their is no holes in the pulley to put a socket through it, but i pray this work cuz im low on money and hey free parts from work i like!!

 

anyone else have an opinion?? ty

 

The pump itself is a direct match. The pulley and holder maybe different. I would just remove the PSP from the bracket from the 95 and install it on the bracket for the 93. Just make sure you connect everything tightly and you should be good to go. Easiest way to tell if the PSP is right or not when swapping from different years is to just go to an auto parts store site, like advance or autozone, and input the two cars for the part search. In this case, the same part number comes up.

 

thank you soo much for your info i just went to advance's website and looked up the PSP for both '93 and '95 and they are the same.. i don't know why i didn't think of doing that in the first place, but again thank you so much i can finally change the pump it's annoyin the heck out of me suealing all the time!!

 

1991 - 1993Cherokee
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Cherokee Briarwood
L6 - 4.0L vin S 242ci - MFI GAS OHV
3 vehicles1993 - 1995Cherokee Country
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Cherokee Laredo
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Cherokee Limited
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1994 - 1995Cherokee SE
L6 - 4.0L vin S 242ci - MFI GAS OHV
5 vehicles1991 - 1995Cherokee Sport
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Comanche
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Comanche Eliminator
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1991 - 1992Comanche Pioneer
L6 - 4.0L vin S 242ci - MFI GAS OHV
1 vehicles1993Grand Cherokee
L6 - 4.0L vin S 242ci - MFI GAS OHV
3 vehicles1993 - 1995Grand Cherokee Laredo
L6 - 4.0L vin S 242ci - MFI GAS OHV
3 vehicles1993 - 1995Grand Cherokee Limited
L6 - 4.0L vin S 242ci - MFI GAS OHV
1 vehicles1995Grand Cherokee Orvis
L6 - 4.0L vin S 242ci - MFI GAS OHV
2 vehicles1994 - 1995Grand Cherokee SE
L6 - 4.0L vin S 242ci - MFI GAS OHV

Should fit your jeep!

 

ty guys im still new to jeeps, this is my first one i hed it since sept 2010 so if i have any other questions i know i can count on jeep forums :-)