Power steering leak
Member
Joined: Sep 2010
Posts: 191
Likes: 3
From: Albuquerque, NM
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0 XJ
If you take the hose off and use a hack saw to cut the crimps off you can just replace the hose and use regular hose clamps. Under the crimps is a regular ribbed nipple deal. It will just cost you the hose clamps and hose. Just make sure it is high pressure hydrolic line you replace it with.
My pressure hose has a little pin hole in the side of it that shoots a steady stream of fluid out during a turn...I don't wanna replace it cause $ are low...what solution would be better...putting some kind of bondo (quiksteel, etc.) on it or getting a rubber hose to fit over the pressure hose and clamp it down?
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
Mar 4, 2023 01:10 PM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
Aug 26, 2020 12:59 PM
TNXJsleeper
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
Sep 2, 2015 05:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)