Was there power at the switch maybe theres a bad fuse ?

 

I didnt check for power. But i did pull the harness back under the dash so i can have easy access to it and the last time i checked the trans fuse, it was still good but i'll check it again and check the harness for power. What kind of reading should i get from the harness?

 

Id check all fuse as for a reading not sure I use a test light just to check for any juice first off...

 

Looks like it would be 12 volts .........

 

Is the 7.5 amp "trans" fuse good? The one in the fusebox.

Ever adjusted your TV cable?

Do a fluid change at least.

 

Cool, thanks. Fuse still looked good, gonna check for power at the harness tomorrow

 

Fuse is still good. The throttle cable? I think I adjusted it before but I'll do it again tomorrow maybe along with the fluid and filter change

 

What part of Hawaii you in ?

 

Born and raised on Maui! And still living here

 

I cant find my multi-meter so I just used a test light. when I tried the tan and striped wire there was no light but when I tried the striped and black wire I got light. Is that the right way? Anyway, when I put my jumper wire back in at first, i did the striped (I think) and black wire so I roasted my trans fuse So now I know for sure I'll be needing that fuse

 

Right way to do what? Jumper the 2 wires with stripes and put a new fuse in the "trans" slot of the fusebox.

 

With the test light. Is it only supposed to light up when I touch either colored wire with the black wire? When i touched the tan and striped wire together with the test light I got nothing

 

One wire will light up which is the input from the fusebox and the other will light up with the switch in Power.