Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Popping Noise Turning Right

Thread Tools
 
Search this Thread
 
Old 04-25-2012, 02:43 PM
  #1  
CF Veteran
Thread Starter
 
XJ.89.Limited's Avatar
 
Join Date: Jan 2012
Location: Nazareth/Pen Argyl, Pennsylvania
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L 242ci I6
Default Popping Noise Turning Right

If I turn to the right slightly I can hear a single pop and It feels almost like the floor buckles under my feet. It only happens under about 30mph, and it is intermittent. If I'm stopped, it turns perfectly fine. It's really weird. Other than that, the jeep drives fine. No other noises on acceleration or anything. Can anyone help me?
Old 04-25-2012, 02:44 PM
  #2  
CF Veteran
 
TheJerm's Avatar
 
Join Date: Jun 2010
Location: Flint/Asheville
Posts: 2,501
Likes: 0
Received 4 Likes on 4 Posts
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Default

ball joints
Old 04-25-2012, 02:57 PM
  #3  
CF Veteran
Thread Starter
 
XJ.89.Limited's Avatar
 
Join Date: Jan 2012
Location: Nazareth/Pen Argyl, Pennsylvania
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L 242ci I6
Default

Ball joints are fine. Passed inspection about a month ago.
Old 04-25-2012, 02:58 PM
  #4  
Seasoned Member
 
jeff2285's Avatar
 
Join Date: Jun 2010
Location: Ontario Canada
Posts: 275
Likes: 0
Received 0 Likes on 0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Default

wheel bearing
Old 04-25-2012, 03:21 PM
  #5  
CF Veteran
Thread Starter
 
XJ.89.Limited's Avatar
 
Join Date: Jan 2012
Location: Nazareth/Pen Argyl, Pennsylvania
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L 242ci I6
Default

Wheel is fine, I just checked it. It did it once when I was stopped now. It does it on pavement, not on gravel or dirt. Something is binding somewhere and I can't see where.
Old 04-25-2012, 03:27 PM
  #6  
Senior Member
 
jhampton's Avatar
 
Join Date: Nov 2011
Location: shelley, idaho
Posts: 667
Likes: 0
Received 1 Like on 1 Post
Year: 1988
Model: Cherokee
Engine: 242CID I-6
Default

trac bar? tie rod ends?
Old 04-25-2012, 03:35 PM
  #7  
Seasoned Member
 
Ellefsonb's Avatar
 
Join Date: Apr 2010
Location: everett, wa
Posts: 310
Likes: 0
Received 0 Likes on 0 Posts
Year: 2001
Model: Cherokee
Engine: str8 6
Default

Tie rod ends catching on sway bar mounts
Old 04-25-2012, 04:07 PM
  #8  
CF Veteran
Thread Starter
 
XJ.89.Limited's Avatar
 
Join Date: Jan 2012
Location: Nazareth/Pen Argyl, Pennsylvania
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L 242ci I6
Default

How would I go about checking those?
Old 04-25-2012, 07:03 PM
  #9  
Junior Member
 
The87XJ's Avatar
 
Join Date: Jul 2011
Location: oregon
Posts: 91
Likes: 0
Received 0 Likes on 0 Posts
Year: 1987
Model: Cherokee
Engine: 4.0
Default

Just take a gander and make sure those rod's dont turn or wiggle. Also that pop could be ur Coil spring if its warped at all.. if its lifted too ur angle on ur front axle could be off putting off afew things. personally id go under the rid turn the wheel and see what movements play around. im redneck soo hell id have someone drive slow with me hanging on. just few feet haha!
Old 04-25-2012, 07:11 PM
  #10  
Seasoned Member
 
joe1992's Avatar
 
Join Date: Feb 2012
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
Default

As crazy as this sounds check calipers! I just fixed mine that was causing the same noise!!!

Caliper binds up axle shaft then POP then it's fine till it comes back around. Odd I know but check it!!! I was shocked!
Old 04-25-2012, 10:06 PM
  #11  
CF Veteran
Thread Starter
 
XJ.89.Limited's Avatar
 
Join Date: Jan 2012
Location: Nazareth/Pen Argyl, Pennsylvania
Posts: 1,057
Likes: 0
Received 1 Like on 1 Post
Year: 1989
Model: Cherokee
Engine: 4.0L 242ci I6
Default

I'll have to check underneath again then. It didn't seem like anything moved around much. And to The87XJ, I actually had that idea too. haha. Just a few feet won't hurt. Also, it's at stock height. No cash for a lift yet :/
Old 04-25-2012, 10:14 PM
  #12  
Senior Member
 
Jarrett's Avatar
 
Join Date: Oct 2011
Location: Raleigh,NC
Posts: 823
Likes: 0
Received 0 Likes on 0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0L HO
Default

Loose trac bar bracket on the frame possibly.
Old 04-26-2012, 12:38 PM
  #13  
Junior Member
 
BlackHammer's Avatar
 
Join Date: Sep 2009
Location: Long Island, NY
Posts: 31
Likes: 0
Received 0 Likes on 0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Default Same thing

I have the same thing happen, but only in warm weather!! I have no idea what it is, but after I install my RC 4.5" lift, hopefully it will be a thing of the past. Good luck!
Old 04-26-2012, 12:42 PM
  #14  
CF Veteran
 
bheath's Avatar
 
Join Date: Jul 2011
Location: JOCO
Posts: 4,521
Likes: 0
Received 1 Like on 1 Post
Year: 1999
Engine: 4.0 Inline 6
Default

i got the same problem. just started about a month ago. i've yet to figure it out. mine sounds like its coming from the passenger side... i'll give it a look tomorrow after work. if i figure it out, i'll let ya'll know.
Old 04-26-2012, 03:30 PM
  #15  
::CF Moderator::
 
cruiser54's Avatar
 
Join Date: Aug 2011
Location: Prescott, Az
Posts: 43,872
Received 1,526 Likes on 1,238 Posts
Year: 1990
Model: Cherokee (XJ)
Engine: 4.0
Default

Originally Posted by Jarrett
Loose trac bar bracket on the frame possibly.
EXTREMELY likely. Just tighten the you know what out of the bolts.


Quick Reply: Popping Noise Turning Right



All times are GMT -5. The time now is 09:17 AM.