Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Please Help

Old Aug 29, 2013 | 06:52 PM
  #1  
AZKARD's Avatar
Thread Starter
Newbie
 
Joined: Aug 2013
Posts: 2
Likes: 0
Model: Cherokee
Default Please Help

i have a 1997 cherokee i had my dash apart putting in a speeker in place of airbag on pass side . i do alot of mods. after i was done the next day my gauge cluster wouldnt work . the gauges dont move . but the lights work when im low on fuel light comes on my map lights in roof stopped working and the underhood light stopped too. i have check fueses and cluster i can not find what the problem is and sugestion would be great thanks .
David "stumpped"
Reply
Old Aug 29, 2013 | 08:26 PM
  #2  
Turbo X_J's Avatar
CF Veteran
15 Year Member
 
Joined: Sep 2009
Posts: 8,567
Likes: 20
From: ☼ Blackhole Sun
Year: My Jeep is a GMC
Default

Perhaps electrical engineering is not your forté?
Reply
Old Aug 29, 2013 | 08:59 PM
  #3  
andrewenglish's Avatar
Member
 
Joined: Jun 2013
Posts: 166
Likes: 0
From: Laguna Beach, CA
Year: 2001
Model: Cherokee
Engine: 4.0
Default

Putting a speaker in place of the pass. airbag?
Reply
Old Aug 30, 2013 | 03:21 AM
  #4  
Big David's Avatar
CF Veteran
10 Year Member
Liked
 
Joined: Jun 2011
Posts: 2,720
Likes: 44
From: Gainesville GA
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0
Default

During removal, the gauge cluster could have pulled loose from the 2 connectors on the back of it.
Try hitting the top of the dash (over the cluster).

As far as the lights, my light under the hood works during the day & never at night- if it works at all.
Reply
Old Aug 30, 2013 | 11:23 AM
  #5  
AZKARD's Avatar
Thread Starter
Newbie
 
Joined: Aug 2013
Posts: 2
Likes: 0
Model: Cherokee
Default

Eveyth ok ng worked fine I will check conectors again...
As for my skill in wiring putting a speeker in place of airbag. My skills are more than enough
I'm asking for a little help not to be criasized about my fabrication ability
Reply

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:21 AM.