Please Help
08-29-2013, 06:52 PM
#1
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Please Help
i have a 1997 cherokee i had my dash apart putting in a speeker in place of airbag on pass side . i do alot of mods. after i was done the next day my gauge cluster wouldnt work . the gauges dont move . but the lights work when im low on fuel light comes on my map lights in roof stopped working and the underhood light stopped too. i have check fueses and cluster i can not find what the problem is and sugestion would be great thanks .
David "stumpped"
David "stumpped"
08-30-2013, 03:21 AM
#4
CF Veteran
During removal, the gauge cluster could have pulled loose from the 2 connectors on the back of it.
Try hitting the top of the dash (over the cluster).
As far as the lights, my light under the hood works during the day & never at night- if it works at all.
Try hitting the top of the dash (over the cluster).
As far as the lights, my light under the hood works during the day & never at night- if it works at all.
08-30-2013, 11:23 AM
#5
Newbie
Thread Starter
Join Date: Aug 2013
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Eveyth ok ng worked fine I will check conectors again...
As for my skill in wiring putting a speeker in place of airbag. My skills are more than enough
I'm asking for a little help not to be criasized about my fabrication ability
As for my skill in wiring putting a speeker in place of airbag. My skills are more than enough
I'm asking for a little help not to be criasized about my fabrication ability
