Parts found in TC - Help!

Reply Subscribe

Thread Tools

Search this Thread

Feb 28, 2010 | 08:14 PM

#16

mike albo

CF Veteran

Joined: Mar 2009

Posts: 8,712

Likes: 2

From: Loomis,California

Year: 1987

Model: Cherokee

Engine: 242 inline six

Quote:

Originally Posted by gsperaz

Ok Mike, based on you explenation it should go in like this.....correct?
If so, Thanks Mike !

yep

Feb 28, 2010 | 08:18 PM

#17

mike albo

CF Veteran

Joined: Mar 2009

Posts: 8,712

Likes: 2

From: Loomis,California

Year: 1987

Model: Cherokee

Engine: 242 inline six

Quote:

Originally Posted by djritter1122

mike what does this do? my 231 doesnt have this.

it has to do with the shifting action

Mar 1, 2010 | 05:39 PM

#18

gsperaz

Thread Starter

Newbie

Joined: Feb 2010

Posts: 22

Likes: 0

Model: Cherokee

OK, the spring and bearing will not go back in the way it was explained.
You cannot compress the spring and the flat side will ride against a some type of stepped disc preventing shifting and there was very little tension on the plug when removed. Please advise ?

Mar 1, 2010 | 05:46 PM

#19

Hommersimpson

CF Veteran

Joined: Jan 2010

Posts: 1,087

Likes: 1

From: St Augustine Florida

Year: 1992

Model: Cherokee

Engine: 4.0

slip the spring INSIDE the thing with the demple going in first...the spring does slide inside the other part right ?

Mar 1, 2010 | 05:55 PM

#20

gsperaz

Thread Starter

Newbie

Joined: Feb 2010

Posts: 22

Likes: 0

Model: Cherokee

Yea, now that makes sense. But the manual shows it the way mike explained it. I guess I go with spring inside the bullet bearing, bullet nose in first. Damn Jeeps ! LOL
Thanks