Parts advice
#1
Newbie
Thread Starter
Join Date: Jan 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Parts advice
Hey all
OK so I need a little guidance on a part or two....
I've managed to source the tie rod ends I need but need to know possible part numbers or names for the drag link ie is it a one piece or can I replace the bush at the wheel end as well as at the pitman arm end...? Also I need to know the name or part number of the end that goes into the pitman arm... All the ends are shot and I've got to get an inspection done.. Hope that makes sense.
Any help is welcome and appreciated.
Thanks in advance
Steve.
OK so I need a little guidance on a part or two....
I've managed to source the tie rod ends I need but need to know possible part numbers or names for the drag link ie is it a one piece or can I replace the bush at the wheel end as well as at the pitman arm end...? Also I need to know the name or part number of the end that goes into the pitman arm... All the ends are shot and I've got to get an inspection done.. Hope that makes sense.
Any help is welcome and appreciated.
Thanks in advance
Steve.
#2
Junior Member
Join Date: Jan 2015
Location: Pennsylvania
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0 Power Tech
Hey all
OK so I need a little guidance on a part or two....
I've managed to source the tie rod ends I need but need to know possible part numbers or names for the drag link ie is it a one piece or can I replace the bush at the wheel end as well as at the pitman arm end...? Also I need to know the name or part number of the end that goes into the pitman arm... All the ends are shot and I've got to get an inspection done.. Hope that makes sense.
Any help is welcome and appreciated.
Thanks in advance
Steve.
OK so I need a little guidance on a part or two....
I've managed to source the tie rod ends I need but need to know possible part numbers or names for the drag link ie is it a one piece or can I replace the bush at the wheel end as well as at the pitman arm end...? Also I need to know the name or part number of the end that goes into the pitman arm... All the ends are shot and I've got to get an inspection done.. Hope that makes sense.
Any help is welcome and appreciated.
Thanks in advance
Steve.
#4
Newbie
Thread Starter
Join Date: Jan 2015
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Trending Topics
#8
CF Veteran
Join Date: Jul 2013
Location: Monett, MO.
Posts: 7,554
Likes: 0
Received 14 Likes
on
14 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
For your Tie Rod setup order a set for a mid-90's V-8 Grand Cherokee direct bolt-in and much stronger than the stock one. You will get the long tie rod & end with a short one and a sleeve all that's needed. I bought the better rods from AutoZone not the cheapies for under $100 out the door.
Never just replace when you can upgrade for so little more.
Never just replace when you can upgrade for so little more.
Thread
Thread Starter
Forum
Replies
Last Post
jurazov
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
12
07-20-2023 04:13 AM
xjwolfman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
8
08-26-2020 12:59 PM
gwthamm
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
09-04-2015 11:29 AM
joshjeepnoob
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
6
09-04-2015 07:20 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)