overhead console headliner problem

Reply Subscribe

Thread Tools

Search this Thread

11-07-2010, 07:42 PM

#16

JeepCoMJ

CF Veteran

Join Date: Nov 2008

Posts: 2,003

Likes: 0

Received 4 Likes on 3 Posts

Year: 1987

Model: Cherokee

Engine: 4.0

toward the back is where it went, and that's where it's supposed to be

Reply Like

11-08-2010, 10:34 AM

#17

00XJ49

Junior Member

Join Date: Sep 2010

Location: Indiana

Posts: 40

Likes: 0

Received 0 Likes on 0 Posts

Year: 2000

Model: Cherokee

Engine: 4.0L I6

Quote:

Originally Posted by e30

thanks man! so if i re route it has to go farther into the headliner? like where it dips up?

If I remember correctly, there's a support member right at the front of the roof - make sure the harness is behind it.

Are you sure it's the whole headliner that's sagging, and not just the fabric? In other words, it's the fiberglass that's getting pushed down? Another thing you might check is that enough of the side is under the top trim, and it's not getting "squished" between the top passenger's side trim and the OHC.

Reply Like

06-13-2011, 08:18 PM

#18

truckntractorhick

CF Veteran

Join Date: Dec 2009

Location: Harleysville, PA

Posts: 2,091

Likes: 0

Received 1 Like on 1 Post

Year: 1998

Model: Cherokee

Engine: 4.0L I6 Powertech

do you have pics with measurements of the holes in the headliner?

Reply Like

06-13-2011, 09:00 PM

#19

jjstultz

Junior Member

Join Date: May 2011

Location: Arizona

Posts: 58

Likes: 0

Received 0 Likes on 0 Posts

Year: 1999

Model: Cherokee

Engine: 4.0L

There's a channel in the roof line for the harness. It's about an inch away from the windshield. I used duct tape to hold my console wiring in place while i installed the liner. The previous owner put in an aftermatket sunroof. You can imagine how much fun that was. Half the headliner was cut out to fit around the sunroof assembly.