Ok i put the 4wd transmission in and now im having some problems.

If you go to put it in any gear like drive, reverse, 1-2, it wont go anywhere, then when I try to put it in part it grinds. Now if i put the transfer case in neutral everything works.

any ideas?

 

I think it might have something to do with the transfer case linkage. I had to make one and im not sure if its the right length. I need to see what the shift leakage looks like

 

Disconnect your xfercase linkage and manually put it in 2h. Adjust your transmission linkage in Park.Leave the transfercase disconnected and take it out for a spin. If it drives okay then you can spend more time on the xfer case linkage.

 

sorry to change subject but can you PM me a pic of your dual air filter intake,, im curious..

 

What position on the on the transfer case do i need to put it in to take it out of the spin?

 

2h

 

FWIW, you'll know you're in 2h when (with the tranny in Park) the rear output will turn maually but the front output will.

 

if i take the linkage off what position does it have to be in on the transfer case. Just in case i have the linkage wrong so I know.

 

the rear will or will not turn manually?

 

You even have me confused now Frank!!!

 

Atleast im not the only one.

 

Think he is taking his afternoon nap! Let him rest and do what he said and see which output is free to turn and which is not. Then when he wakes up you will have the info.

 

I hope so. I want to figure out whats wrong with my cherokee.

 

With the tranny in Park and the transfer case in 2h, the rear will not turn, the front will.

Sorry for the delay, I was at my son's H.S Football Game. We won 21-6 angainst a a heavily favored opponent.

 

Congrats on your sons win. I remember high school football games. they were great. Ok tomorrow im going to try it tomorrow. I serious hope nothing is wrong. this whole swap has been very frustrating.