Ok i know its a stupid question...
08-31-2010, 12:49 PM
#1
Member
Thread Starter
Join Date: Aug 2010
Location: Lansing / Ortonville Michigan
Posts: 152
Likes: 0
Received 1 Like
on
1 Post
Year: 1987 / 1994
Model: Cherokee
Engine: 4.0 L6
Ok i know its a stupid question...
I am not at home to check and i am ordering new gaskets... can anyone tell me what STOCK diff the front was in an 1987 cherokee limited? it has the 4.0 if that helps? i know i can just look at it and match the pictures but I am not at home....
08-31-2010, 01:03 PM
#7
Member
Join Date: Aug 2010
Location: Frederick, MD
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0L Straight six
Trending Topics
08-31-2010, 02:21 PM
#10
Senior Member
Join Date: Mar 2010
Location: Logan, UT
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L i6
yep gasket maker..... got the RTV red, got some RTV red all over me and the garage floor, but it work great.
I am sure you can find a tutorial better than what I am abou tto say there...
Remove the cover, clean everything good (I used a rasor blade and some clean rags) make sure everything is dry.
Apply a small bead of gasket on the edge of the cover (I went around the bolt holes)
Wait a minute or so that the gasket start skinning, put the cover back on and hand tighten the bolts. wait a couple of hours and torque the bolts in a criss-cross way.
Refill your oil the next morning... (some will argue that you don;t really need to wait...)
If it is stock it is most likely the Dana 35 (IIRC dana 44 was on some 88-89 with the tow package) in the back and definitely the dana 30 in the front
I am sure you can find a tutorial better than what I am abou tto say there...
Remove the cover, clean everything good (I used a rasor blade and some clean rags) make sure everything is dry.
Apply a small bead of gasket on the edge of the cover (I went around the bolt holes)
Wait a minute or so that the gasket start skinning, put the cover back on and hand tighten the bolts. wait a couple of hours and torque the bolts in a criss-cross way.
Refill your oil the next morning... (some will argue that you don;t really need to wait...)
If it is stock it is most likely the Dana 35 (IIRC dana 44 was on some 88-89 with the tow package) in the back and definitely the dana 30 in the front
Thread
Thread Starter
Forum
Replies
Last Post
YourPalBigAL
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
11-09-2015 10:46 PM
investinwaffles
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
09-24-2015 10:05 AM
cali93zj
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
5
09-19-2015 06:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)