where can i source the jeep side of the oil sending unit plug? the harness side clip is broken so i get random oil pressure readings while i'm driving. the vibrations from driving cause the plug to slip out and give some crazy readings. any help?

 

zip tie the connector together, I've got a few like that.
or, not sure if this will work, but you can try an earlier model sending unit...I know 1990 and 91 use a simple blade connection, and 1995 uses some complicated automotive connector thats prone to breaking.

 

will see if the zip tie method will hold. seeing that its not a moving part, it should

 

If that does not work check this.
http://www.napaonline.com/Catalog/Ca...165_0334779096

 

looks perfect, except the oem one has only one wire. clip the one i don't need?

 

mine looks like two wires that are VERY tightly taped/shrinkwrapped together. should be two wires

 

ok. didn't look like two wires, but the plug is jacked. i'll have to look into this more before i do anything with that sensor.

 

as it would appear, the harness does only have one wire


it was also traced out in a chiltons manual to only have one wire

 

hmmm... you got me on this one