Offroad Lights Factory Bumper
#1
Seasoned Member
Thread Starter
Join Date: Aug 2008
Location: Maine
Posts: 494
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1991 Laredo
Model: Cherokee
Engine: 4.0L H.O.
Offroad Lights Factory Bumper
Anyone know where you can get brackets that fit the factory holes in the front bumper to put in some offroad lights?
#2
::CF Administrator::
Join Date: May 2008
Location: Okc area
Posts: 10,039
Likes: 0
Received 15 Likes
on
11 Posts
Year: 1991
Model: Cherokee
Engine: 4.0 I6
As far as I know the factory fog lights that mount to the front bumper just bolt on no special mounting brackets.. At least based on how mine are mounted on a 91 XJ..I can take some snap shots tomorrow morning since by the time I leave school it will be way late.
#3
CF Veteran
I have seen people drill through the stock bumper and mount a set of slim lights. The bumpers are pretty weak and should be pretty easy to drill through or you could go with one of these.. http://www.quadratec.com/products/72110_700.htm
#4
CF Veteran
Join Date: Jan 2008
Location: Puerto Rico
Posts: 1,504
Likes: 0
Received 0 Likes
on
0 Posts
I have seen people drill through the stock bumper and mount a set of slim lights. The bumpers are pretty weak and should be pretty easy to drill through or you could go with one of these.. http://www.quadratec.com/products/72110_700.htm
Last edited by Belto; 08-20-2008 at 06:49 PM.
#5
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
When I had a factory bumper I had two Hella 500s on it and I just drilled the holes in the top of the bumper so that I had factory fogs and the Hellas. Looked and worked great. Sry no pics, this was before I had a digital camera or knew how to post pics.
#6
Member
Join Date: Jun 2008
Posts: 102
Likes: 0
Received 1 Like
on
1 Post
Year: 1994
Model: Cherokee
Engine: 4.0
there should be plugs on your bumper where stock fog light would go i took my plugs off and my lights bolted right on if your lights are bigger the worse that is going to happen is your going to need to drill bigger holes.
Trending Topics
#10
Seasoned Member
Thread Starter
Join Date: Aug 2008
Location: Maine
Posts: 494
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1991 Laredo
Model: Cherokee
Engine: 4.0L H.O.
I mounted some lights into the factory holes, and ran the wires through the other set of holes. I'll post some pics soon, but I think they look pretty good.
#13
Renix Super Guru
Join Date: Mar 2008
Location: In yourz postez fissin jurr spelinzs
Posts: 24,653
Likes: 0
Received 16 Likes
on
12 Posts
Year: 1990XJ/1989MJ
Model: Comanche
Engine: 4.0L Renix
Those lights look good. You did a great job. Where did those lights come from I have never seen those before. Looks very unique. Congratulations.
#14
Seasoned Member
Thread Starter
Join Date: Aug 2008
Location: Maine
Posts: 494
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1991 Laredo
Model: Cherokee
Engine: 4.0L H.O.
Thanks Blue, they came off from a friend of mine's S10 rollbar. Not sure of the make and whatnot, but they were free!
Last edited by theangler; 09-26-2008 at 07:05 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Jooman07
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
17
01-03-2016 04:15 PM
riderjay253
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
09-16-2015 11:31 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)