i have a 2000 4door cherokee classic 4x4. when i bought it it came with a 1 3/4 inch coil spacer and lift shackle in the rear. i did some trimming and have 33x12.5 bfg's on it now. i have a 3 inch coil spacer and add a leaf that i went to put on but my stock lower control arms dont seem to be long enough, when i assembled everything the coils were arched like the axel needed to be scooted forward,also the track bar was off. so i put it all back the way it was and decided to up the anty if you will...im buying 3.5" lift coils, 6" leaf springs. i assume ill need a 6 inch drop pitman arm, adj. trackbar, swaybar links, brakeline extentions, and of course shocks. will i need upper control arms and any ideas on what lower control arms ill need and will i need a transfer case drop? i have a dana 30 up front a np231 transfercase and a chrysler 8.25 in the rear.

 

Get a hold of XJOFFROAD on the site here.

 

You need:
Gears
SYE
Drive Shaft (TC drop worthless with 6+" lift)
Long Arms

Somebody else can list the other 1000 things you left off the list.

 

^This guy too^