Is this normal wear?
#1
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Los angeles
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Is this normal wear?
I bought a 2001 cherokee with 150,000 miles a week ago, i already bought a 3" RC lift (getting it today) and some 31" tires but yesterday while spraying on some PB blaster i noticed the rear springs are really worn down.
With no load at all, the leafs are pretty much flat (parallel to the floor) if not almost arching downwards.
I know you can't really see them from here but you can get an idea of the clearence i have (it is currently stock). I measured in the middle from where the body ends down to the floor and the clearence is about 16-17 inches, is this normal for a stock cherokee? Also, the RC lift comes with 1 additional leaf, is ok to just add that one or would i have to swap out the all of them if they are so worn out?
Any input would be appreciated thanks.
With no load at all, the leafs are pretty much flat (parallel to the floor) if not almost arching downwards.
I know you can't really see them from here but you can get an idea of the clearence i have (it is currently stock). I measured in the middle from where the body ends down to the floor and the clearence is about 16-17 inches, is this normal for a stock cherokee? Also, the RC lift comes with 1 additional leaf, is ok to just add that one or would i have to swap out the all of them if they are so worn out?
Any input would be appreciated thanks.
#3
CF Veteran
Join Date: Jul 2009
Location: New Jersey (Milltown, Lavallette, and Wayne)
Posts: 2,245
Likes: 0
Received 1 Like
on
1 Post
Year: 1999
Model: Cherokee
Engine: 4.0L I6
Once you put that add a leaf in it should help you out some if not you can always do a bastard pack with S-10 leaves and there a plenty of threads on do this. Use the search to find out how to do this.
#4
CF Veteran
Join Date: Mar 2009
Location: Loomis,California
Posts: 8,712
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1987
Model: Cherokee
Engine: 242 inline six
stock rear springs have little to no arch,so basically they are flat.If you messure from the center of your hub cap to the bottom of the flare iy shouldbe at 17" the front on the same messurement is 17.5.As far as the add a leaf goes on a fairly good spring you will be ok for awhile,the best is to get the full spring pack.
#5
Its normal. The Po of my jeep used it to tow his boat so my rear leafs are flat as well. She sags really bad. The add a leaf will help a little but i think it will still sit lower in the rear. I would do like JerseyJeeper said and look into bastard packs or just get new leafs from RC.
#6
Junior Member
Thread Starter
Join Date: Apr 2010
Location: Los angeles
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Well i guess it seems it is kinda normal lol
If the extra leaf doesn't give me the desired lift i'll probably try the bastard pack.
Thanks for the advice guys, really appreciate it.
If the extra leaf doesn't give me the desired lift i'll probably try the bastard pack.
Thanks for the advice guys, really appreciate it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
jmsummers2012
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
53
04-30-2021 02:35 PM
Kathy Zirkle
Cherokee Chat
7
09-27-2015 08:38 PM
Zerocyde
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-27-2015 02:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)