jeepin4fun

I have an issue with the check engine light not coming on. Sounds odd but when I turn the key to the "ON" position only the brake light and washer fluid light come on when they all should come on as a "test". There is a code (p1698) and my reader says "mil on" so the check engine light should be on.

I replaced all the bulbs and now the cel and service engine soon light are lit at about 10% of what they should be. Any ideas would be great. Thanks

freegdr

like not very bright or not on long?

jeepin4fun

they were off completely until I put in new bulbs now the check engine light and service engine soon light are "not bright" you can barely tell there on.

freegdr

all other lighs bright? correct bulbs ...

jeepin4fun

I swapped the one out of the washer fluid light, which I know works and is bright (because its on all the time). And it still was not bright. I swapped several bulbs and still nothing.

Are there any relays or fuses I can check? Ground? I looked and the only ground I could find that looked funny was a purple with yellow stripe wire that was bolted to the top back of the valve cover.

Thanks