Hi. I have a 1994 Jeep Cherokee Country and for some reason there is no power getting to the fuel pump. I just put in a new fuel pump and filter and also changed out the fuel pump relay switch fuse and that didn't work, still getting no power to fuel pump. does anyone have any idea what could be the problem???

Thanks,

 

you got power to it before you changed all this? if you can i would run two wires from battery to the wires to the fuel pump and test jump it off, i have gotten bad parts from the part store. more that i can count on one hand friends taking things back 5-6 times to get a good part. did you put a meter at the pump and see if it actually didnt have any power to it?

 

yes i checked the wiring to the pump and nothing going thru it.

 

I think going to try running the wires from the battery to see if that works.

 

Where did you buy the pump from i remember buying pumps from pepboys and they all failed with a month and 2 of them never actually worked like what your describing

 

Autozone or napa one... it was doing the same thing with the old pump so i dont think that its the pump.

 

Ignition switch? I've got the same problem. If I run a wire straight from the battery to the fuel pump fuse it will work fine, and the fuse itself is fine. I'm about to replace my switch. I'll let you know if that works

 

please let me know when you change your ignition switch, if it works or not.

 

do you have the ceramic resistor on the drivers side fender

 

 

tried running a wire straight from battery an still no power, looks like im going have to change the whole wiring harness.

 

if theres no ground at the pump it wont run either

 

same thing is happening With me! Please help

 

Girl,


It would be a good idea to put your Jeep details in your User CP details or in your signature so people can help you more quickly with your issues.