Saw one time where sumbody cut out old rusty rockers and replaced with square tubing. Need sum pics and specs please. Thanks

 

Look in the writeups section I think there is one in there.

 

I didnt see it. Seen one about boat rockers but not what Im wanting to do

 

Come on guys sum body has to know

 

Are you talking about putting square tubing in there strictly as a replacement, or using them as rock rails?

 

Here ya go.

The ones I made are totaly bolt on, made from 2x4 tube and capped at both ends. I sealed all the seams to the body with black RTV.

 

Search for EricsXJ on JF his build thread has some pics and a write-up on how he did his.

 

That looks sweet, did you make them?

 

There is also another write up out there about using rectangular steel tubing as rockers and also as air storage tanks for an onboard air system. seems like modding them into air tanks is only a few steps more than normally making them so if you have onboard air or are planning on adding it later this may be something to look at.

I dont have the link now but if I find it I'll edit this post to include it.

EDIT: Here's the link: http://www.madxj.com/MADXJ/technical...ckerPanels.htm

 

Yes, hand made.