Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here XJ (84-01)
All OEM related XJ specific tech. Examples, no start, general maintenance or anything that's stock.

Need parts

Thread Tools
 
Search this Thread
 
Old Jul 31, 2010 | 01:31 PM
  #1  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default Need parts

Ok I have a 91 Laredo and I need a new headliner and streering colum. What other years can I use. It has tilt wheel( Do I have to use another tilt wheel?) and no air bags.
Reply
Old Jul 31, 2010 | 01:41 PM
  #2  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

One more question. Hoiw do you change out the lock on the colum when I get the new one.
Reply
Old Jul 31, 2010 | 01:42 PM
  #3  
warpig602's Avatar
Member
 
Joined: Jul 2010
Posts: 102
Likes: 0
From: Cedar Rapids, Ia
Year: 1998
Model: Cherokee
Engine: 4.0
Default

90 to 95 I believe should work
Reply
Old Jul 31, 2010 | 01:47 PM
  #4  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Originally Posted by warpig602
90 to 95 I believe should work
For the streering colum?
Reply
Old Jul 31, 2010 | 02:11 PM
  #5  
warpig602's Avatar
Member
 
Joined: Jul 2010
Posts: 102
Likes: 0
From: Cedar Rapids, Ia
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Originally Posted by 91familyxj
For the streering colum?
yeah
Reply
Old Jul 31, 2010 | 06:25 PM
  #6  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

So I went and got a new steering colum and some other goodies. How do I change the key tumblers over?
Reply
Old Aug 4, 2010 | 01:54 PM
  #7  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Ok well I figured out the key but the tail end shaft it just a little short. I dont know what they changed?
Reply
Old Aug 4, 2010 | 02:01 PM
  #8  
warpig602's Avatar
Member
 
Joined: Jul 2010
Posts: 102
Likes: 0
From: Cedar Rapids, Ia
Year: 1998
Model: Cherokee
Engine: 4.0
Default

Can you swap yours off of the old one?
Reply
Old Aug 4, 2010 | 02:03 PM
  #9  
XJ Stryker's Avatar
CF Veteran
 
Joined: Apr 2008
Posts: 7,661
Likes: 15
From: Smiths Station, Al
Year: 87
Model: Wagoneer
Engine: 4.0 I6
Default

for the key ignition I just used a Chiltons or Haynes it was pretty straight forward and not a hard swap at all. You will need a steering wheel puller.
Reply
Old Aug 4, 2010 | 02:23 PM
  #10  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Originally Posted by warpig602
Can you swap yours off of the old one?
I have tried to pull the shaft out of my old one but had no luck. I know im missing somthing stupid. lol I think Im ganna go look at the JY one more time for another one and then see if the shaft in the engine bay is different lenth.
Reply
Old Aug 4, 2010 | 02:25 PM
  #11  
91familyxj's Avatar
Thread Starter
CF Veteran
 
Joined: Aug 2009
Posts: 1,263
Likes: 0
From: Las Vegas
Year: 1996 Limited
Model: Grand Cherokee
Engine: 5.2
Default

Originally Posted by XJ Stryker
for the key ignition I just used a Chiltons or Haynes it was pretty straight forward and not a hard swap at all. You will need a steering wheel puller.
Ya I got it out and have figured out how to swap them and do all that its just the end of the shaft that goes through the firewall it like 1.5 to 2 inches short.
Reply
Old Aug 4, 2010 | 02:43 PM
  #12  
Caish's Avatar
CF Veteran
 
Joined: Jun 2010
Posts: 1,220
Likes: 5
From: Arkansas
Year: 1987 & 1996
Model: Cherokee
Engine: 4.0
Default

Originally Posted by 91familyxj
Ya I got it out and have figured out how to swap them and do all that its just the end of the shaft that goes through the firewall it like 1.5 to 2 inches short.
The shaft is two parts that slide into each other, make its slid all the way out.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
t.mcginley.jr
Jeep Builds
105
Jan 31, 2024 04:58 PM
NM-XJ
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
18
Oct 23, 2018 04:21 PM
erupert66
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
Sep 15, 2015 02:07 PM
PhilA
Introductions
3
Sep 10, 2015 12:37 PM
Hewittxj
Modified XJ Cherokee Tech
4
Sep 8, 2015 06:21 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 08:27 AM.